- 符合:
- KAWASAKI
- KAWASAKI Z1000 (air-cooled) A1/A2
- KAWASAKI Z750 (air-cooled) A4/A5
- KAWASAKI
- KAWASAKI
- ...和更多.
We replaced it when we renewed the Dynamo system. Although there is no visible difference compared to the one that had been used for about 50 years, it is a relief to replace it with a new one.阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
After 10,000km, the front clutch started to slip when cold, so I changed it. When I took it off, I found that it had decreased. The clutch is very normal, but the lever is much lighter and I am glad t...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
I used it for Engine overhaul in PAMS.Material in the Engine:For Rubber products, you want to use trustworthy products from a reliable Shop.We recommend you to use this product for engine overhaul.阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
I am using this Grommet for Oil leak.Two and a half years of use and no leaks so far.This Grommet is an overwhelming performance Grommet compared to the existing Grommet that was on the market.But eve...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
Aging around the Clutch? It is thrown in together with the clutch plate when it is replaced byIncluding the material, it is said that the parts were produced by the experience of the Z specialty store...阅读更多 - 符合:
- SUZUKI GS750
- SUZUKI GS1100
- KAWASAKI Z900 (KZ900)
- KAWASAKI Z750FX
- KAWASAKI Z750
- ...和更多.
In the early days, sp2 did not have a terminal, and the plug cord was stripped and fixed with Bond.It's easy to install now.Because the Plug cap that had been put on before had deteriorated, or perhap...阅读更多 - 符合:
- SUZUKI GS750
- SUZUKI GS1100
- KAWASAKI Z900 (KZ900)
- KAWASAKI Z750FX
- KAWASAKI Z750
- ...和更多.
It's in use on the KZ1000JShop-recommended plug cord, endorsed by Best Match with AS Votani SP2!I didn't put it on myself, but the installation is much betterThe black plug cap is NORMAL and I like th...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
OEM missing push rodThanks to PAMS for selling these partsPush rod operation when disassembling below the waist to resolve the underlying Push Rod Damage I think the best thing to do would be to repla...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
This is the first part that we have to use RiproParts because there is no OEM parts setupIt's great that it's clearly stated that it's a Viton material with unrivalled strength for gasoline and oil Ma...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
I am very disappointed and angry.
I have bought the Kit de conversion du système d'embrayage PAMS Modèle : CCVK-WOC, it not suitable for Kawa Z1 discs.
Ok, i buy these discs, springs and so on fr...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
Purchase recommended by acquaintance.Although it is before arrival, Pams' Parts is high in product precision even if it says anything.Although it is a setting higher than that of other companies...阅读更多 - 符合:
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI
- KAWASAKI Z750 (water-cooled) 72-80
- KAWASAKI
- KAWASAKI
- ...和更多.
I use it for a while..With CarbonGraphite, oil leakage is fully shut down. Cleaning is easy without sticking at the time of replacement.As a measure against Heat, also for Head cover METALSpec. I want...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI
- KAWASAKI
- KAWASAKI Z750 (water-cooled) 72-80
- ...和更多.
Very reliable gasket kit. Reinforced viton center o-ring seal last longer. The base gasket with metal core prevents gasket from tearing in case over-torqued and seals well. The H-cover gasket may stil...阅读更多 - 符合:
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI
- KAWASAKI Z750 (water-cooled) 72-80
- KAWASAKI
- KAWASAKI
- ...和更多.
I wanted to try this gasket because it has a steel core in the middle and fiber coating on the outside. This way when you torque the head the gasket will not crush and the piston does isnt too proud. ...阅读更多 - 符合:
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI
- KAWASAKI Z750 (water-cooled) 72-80
- KAWASAKI
- KAWASAKI
- ...和更多.
It is a firmer product than OEM.Heat conduction is also good with METAL and it prevents rise of oil sound even in continuous running.Although I was worried about the adhesion between the Block and the...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
I took off the push rod during Maintenance and found that the feeling of wear was felt strong and the tip of the Clutch side was getting rattled and I was curious.There is other Other Company Product,...阅读更多 - 符合:
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI
- KAWASAKI Z750 (water-cooled) 72-80
- KAWASAKI
- KAWASAKI
- ...和更多.
It is Repeater.Every time I purchase with Head Gasket and Set.If you buy with Head Gasket you might think that Set is good, but Head cover gasket is like OEM Type..This METAL likes the place not troub...阅读更多 - 符合:
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI
- KAWASAKI Z750 (water-cooled) 72-80
- KAWASAKI
- KAWASAKI
- ...和更多.
It is Repeater.I have used a couple of pieces to build a friend's Engine.This time 72 pies thick 1. I bought it in 1.Basically unless you are doing a plane etc. 1. I think that it is exactly the o...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
I was caught on the tip of OEM's Clutch push rod, so I bought it. Currently this Push rod is very helpful for Manufacturer OEM due to discontinued items. For the same parts Copy is sold also from ...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI
- KAWASAKI
- KAWASAKI Z750 (water-cooled) 72-80
- ...和更多.
Material is obviously improved more than OEM's Gasket. In outside Gasket etc. even comparing it is even stupid Quality.It is especially recommended for those planning not to open the Engine many t...阅读更多