切削加工 自动凸轮链条张紧器
商品 # 72-623
拉伸杆配备了齿轮锁定机构,可防止快速加速工作造成的反冲。
支持标准的橡胶拉伸器以及带有加强型惰轮的拉伸器。
紧凑的全坯体,是安装 "赛车化油器 "时避免干扰的理想选择。
安装螺栓带垫片。
Fits: KAWASAKI Z1000 (air-cooled) 72-80, KAWASAKI Z1000 MkII 79-80, KAWASAKI Z1-R/Z1-RII Type 2, KAWASAKI Z750 (air-cooled) 72-80, KAWASAKI Z900 (KZ900) 72-80
I bought this one because the sound came out of the No-Mal Tensioner, but Spring's Weak rebound? I removed the carburetor and this time, the sound became worse I tried to install it with Spacer, but the spring rebounded and did not allow Bolt to take a bite MmView Detail
Fits: KAWASAKI Z1000 (air-cooled) 72-80, KAWASAKI Z1000 MkII 79-80, KAWASAKI Z1-R/Z1-RII Type 2, KAWASAKI Z750 (air-cooled) 72-80, KAWASAKI Z900 (KZ900) 72-80
I bought this one because the Nomar Tensioner came out sounding, but as per Manual I installed it, but the spring rebound is weak? Notch did not extend and the sound became terrible instead This time I removed the carburetor all the way again and tried to put in the Spacer However, it was difficult to install it because of the strong rebound of Spring without the Bolt It was a waste of moneyView Detail
Fits: KAWASAKI Z1000 (air-cooled) 72-80, KAWASAKI Z1000 MkII 79-80, KAWASAKI Z1-R/Z1-RII Type 2, KAWASAKI Z750 (air-cooled) 72-80, KAWASAKI Z900 (KZ900) 72-80
It was attached to ZEPHYR 750, but it was a rough sound that is the same as OEM even for the stronger Spring. As I was installing Notch, Bolt was shorter than OEM so half of Tap on Engine side licked and brought it. I managed to install it if I changed it to long Bolt. I was scared so I did not put Notch out. And, although it doubles the price but turns it into Vito 's Tensioner singing exclusively for ZEPHYR 750, Bolt was a proper length and it became quite quiet with a splendid split expression for those who tried to be quiet with a Notch outstanding like me. So PMC is this evaluation. Although it is not until it is because it is not a compatible model (Lol)View Detail
Fits: KAWASAKI Z1000 (air-cooled) 72-80, KAWASAKI Z1000 MkII 79-80, KAWASAKI Z1-R/Z1-RII Type 2, KAWASAKI Z750 (air-cooled) 72-80, KAWASAKI Z900 (KZ900) 72-80
Nice quality, sets the tension for the cam automatically. Comes with an extra spring and bolts plus spacer for extra sensitive tension.View Detail
Fits: KAWASAKI Z1000 (air-cooled) 72-80, KAWASAKI Z1000 MkII 79-80, KAWASAKI Z1-R/Z1-RII Type 2, KAWASAKI Z750 (air-cooled) 72-80, KAWASAKI Z900 (KZ900) 72-80
The construction is very good.
I think that it would be better to increase the corresponding model.
I have attached to ZEPHYR, but I use it without problems.View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。