X-14 ( X-FOURTEEN) 全罩安全帽 MARQUEZ 4 彩绘

品牌 SHOEI
 商品编号 : W-666-P9184397
(4 会员评论)
排名 #4 in 全罩式安全帽(全面式头盔)
定价: 5,080.75 RMB (82,080 日币)
定价: 4,306.94~ RMB (69,579 日币)
您将省下 773.81 RMB (15%)
点数: 696~pt (1%)
一旦您选择选项,将显示预计交货时间。
* "出货" 时间为预估时间。
当订单成立时,我们将确认制造商的库存并透过e-mail发送确认出货时间给您。
>Shipping info
数量:
在您加入购物车前请选择选项。
稍后再确认 稍后再确认
点击并加入您的待购清单
商品以下描述由Google自动翻译。
商品叙述
颜色 : TC-1红色 / 黑色
摩托车头盔
出生于赛车

SHOEI的RACINGFull面,已经训练有由MotoGP代表的最高峰路赛跑“X系列” 。

以高水平的安全,我们介绍从顶级类别的RaceSupport获得的最先进的技术,没有任何限制,壳,盾,室内装饰,AeroDevice,更新他们所有 。
RACINGFull面对赢得在种族,完全以真实赛车规格,“X-Fourteen”的形式,马克·马克斯球员2016 SeasonSpec 。 图形模型“MARQUEZ 4” (Marquez 4) 新阵容 。

施工 : AIM + (高级集成矩阵加多光纤)
加上高性能有机纤维具有高弹性性能,基于复合层压结构的坚韧的玻璃纤维和有机纤维制成三维形状加上,高性能壳结构刚性弹性优秀虽然重量轻 。
标准 : SNELL / JIS / MFJ官方认可
包括零件 : : 呼吸保护J,下流窗帘D,下空气扰流器,CWR - F PINLOCKR©镜头,硅油,盾牌贴纸 。 11贴纸)专用布袋



X-Four的主要特点




■Aeroforme■

科学的赛车位置
在高速下提高空气动力学性能

X - 十四,强调电路使用,设置Rider强烈地前进到BasePosition的骑乘位置 。
在那个位置头盔我们科学地分析了风洞实验与从前额到头后部和赛车服的背面的运行风,并完成了壳的设计 。
后稳定器和下空气扰流器根据边缘和形状配备可互换的RearFlap,壳体表面的条件已优化,以提高空气动力特性 。
结果,与风洞实验相比,电梯 : -3%,拖动 : -10%,Yaw Ing : 我们实现了-50%的值, (内部基准值) 。
空气动力性能提高到大宽度也有助于减少骑手的疲劳 。

 
エアロフォルム




■屏蔽系统■


对应于撕开膜的附着
采用二次曲面CWR-FShield

X-Four有一个新开发的二次表面盾牌“CWR-F”新近采用 。
CWR-FShield由聚碳酸酯制成,彻底改善光学特性通过优化微妙的曲率和厚度根据部分确保自然和清晰的视野,并提高屏蔽刚度,适合屏蔽消除偏差和扭结 。
结合QR - EShield底座,轻松确保连接和拆卸,并确保高气密性与可变轴双作用机构 。

 
シールドシステム




■PINLOCKR©EVO镜头■

防止屏蔽在低温或在降雨过程中混浊是舒适骑乘的基本条件 。

X-Fourteen防止屏蔽PINLOCKR EVO透镜雾化到标准设备 。
覆盖几乎所有的视野,PINLOCKR©EVO镜头保持阴天,并确保在每个条件下舒适的可见性 。

 
PINLOCK






■ 室内 ■

对应于赛车位置
调整内部的“佩戴角度”

立式骑行姿势NAKED和上身向前倾斜SUPER SPORTS 750 / 在赛车机器中,头盔自然所处的角度是不同的 。
关注这一点,在X-Fourteen中,可以根据骑乘位置在两个阶段中调整内部的覆盖角度 。
通过改变面颊垫和中心垫的安装位置,即使在覆盖角度相对于标准位置向前旋转大约4度的赛车位置,结果也不能获得上视图,它有效地确保充分的前部可见性演示 。
视角,允许你查看到角落出口的方式,当你击倒机器以一个倾斜角度为每个骑手创造大优点 。

 
内装1502





内装1503通过交换可分割垫
为每个骑手提供卓越的适合感


X - 十四采用了一个新的内部系统,可以独立更换,中心垫,这是舒适的重要部分,分为六 。 在该系统中,通过根据乘员头部的形状改变垫厚度来制造前额,枕骨区域,颞部,冠部和颈部的垫 (选项) ,可以进一步增强配合 。 此外,内表面的材料在过去已经获得普及,“HYGRAR”具有优良的吸湿快速干燥性能,并且在混合物中采用漂亮的凸起材料 。 脸颊垫有E以方便移除紧急头盔 。 Q 。 R 。 S 。 配备 。



内装1504






■紧急快速释放系统E 。 Q 。 R 。 S 。 (紧急快速释放系统) ■


紧急情况下的头盔拆除系统

在偶然发生事故的情况下,第三方更难以进行救援行动以从头盔中除去头盔 。
不仅减震性能和舒适性,而且在紧急情况下支持这种救援工作是头盔的大关闭功能之一 。
E由SHOEI开发 。 Q 。 R 。 S 。 (紧急快速释放系统) 这是很容易拉专属的丝带,可以轻松地删除头盔,同时保持在颈部的负担可能的伤害的最小极限 。

*通常,当为了维护等目的而移除颊垫时 。 e 。 Q 。 R 。 S 。 请不要使用 。
 
EQRS




■通风系统■

主动将行驶风导向内部,有效排放热量和水分,
通风可以感觉到风

X-Fourteen的通风系统在前部和上部两个地方配备有进气口,以便即使在强大的前视姿势下也能表现出足够的效果 。
从顶部和后部稳定器的出口孔有效地使用负压排出热空气 。

此外,在X-Fourteen,安装在盾牌底部的LowerAir进气被分成两条线,并创建了一条新的航线 。
与过去一样,上部进气系统具有Defferential Gear Ro Star功能,将行驶风引导至盾牌内表面,下部进气系统将空气路径布置在面颊垫上,在此处可能会捕获热量和水分,导致行驶风 。

 
ベンチレーションシステム




■外壳和衬垫■

X-14的尺寸设置是提供6size到XS-XXL与4尺寸的壳和5尺寸的吸震衬里的组合,以提供最好的感觉每个车手 。

壳层AIM +结构由层压强玻璃纤维和有机纤维组成,可以提供清晰的安全性 。
除了JIS标准,它也符合最新的SNELL标准 。



介绍视频X - 14在这里↓↓

Color: TC-1 Red/Black
Helmet for Motorcycle
Born from Racing

SHOEI's RACINGFull face, which has been trained with the highest peak Road race represented by MotoGP "X-Series".

With a high level of safety, we introduce state-of-the-art know-how obtained from Top category's RaceSupport without any limitation, Shell, Shield, interior decoration, AeroDevice, renewing them all.
RACINGFull face for winning in Race, exactly in the form of REAL RACING SPEC, "X-Fourteen" , Marc Marquez player 2016 SeasonSpec. Graphic model "MARQUEZ 4" (Marquez 4) Newly Lineup.

Construction : AIM+ (Advanced Integrated Matrix Plus Multi-Fiber)
Plus high performance organic fiber with high elastic performance based on composite laminated structure of tough Glass fiber and organic fiber made into three dimensional shape Plus, a high performance Shell structure excellent in rigid elasticity despite light weight.
standard : SNELL / JIS / MFJ official recognition
Included Parts : : Breath Guard J, Chin Curtain D, Lower Air Spoiler, CWR - F PINLOCKR © lens, Silicone oil, Sticker for Shield (No. 11 Sticker) exclusive use cloth bag



Main features of X-Fourteen




■Aeroforme■

Science the Racing position
Improve aerodynamic performance at high speed

X - Fourteen, which emphasizes Circuit use, sets the Riding position at which the Rider strongly advances to BasePosition.
In that Position Helmet We scientifically analyzed the wind tunnel experiment with the running wind flowing from the forehead to the back of the head and to the back of the Racing suit, and completed the design of Shell.
Rear stabilizer and Lower air Spoiler equipped with interchangeable RearFlap according to Edge & Shape, Condition on the surface of Shell have optimized to increase aerodynamic characteristics.
As a result, in comparison with the wind tunnel experiment, Lift : -3%, Drag : -10%, Yaw Ing : We achieved a value of -50% (Internal reference value).
The aerodynamic performance improved to the Large width also contributes to Large for reducing Rider's fatigue.

 
エアロフォルム




■Shield system■


Correspond to attachment of Tear-off Film
Adopt quadratic surface CWR-FShield

X-Fourteen has a newly developed quadric surface Shield "CWR-F" Newly adopted.
CWR-FShield made by Polycarbonate which thoroughly improved optical characteristics by optimizing subtle curvature and thickness according to part secures natural and clear view and improves shield rigidity and is suitable for Shield Eliminate deflection and kink of.
Easily secure attachment and detachment with Combination with QR - EShield base, and secured high airtightness with variable shaft Double action mechanism.

 
シールドシステム




■PINLOCKR© EVO lens■

Preventing shields from cloudy at low temperatures or during rainfall is an essential condition for comfortable riding.

X-Fourteen prevents fogging of the shield PINLOCKR EVO lens to Standard Equipment.
Cover almost all of the field of vision, PINLOCKR © EVO lens keeps cloudy and ensures comfortable visibility in every Condition.

 
PINLOCK






■ Interior ■

Corresponding to the Racing position
Adjust "wearing angle" of interior

Upright riding posture NAKED and upper body tilting forward SUPER SPORTS 750 / In the Racing machine, the angle at which the Helmet naturally lies is different.
Focusing on this point, in X-Fourteen it is possible to adjust the covering angle of the interior in two stages according to the riding position.
By changing the mounting position of the Cheek Pad and the center pad, even in the Racing position where the covering angle rotates about 4 degrees forward with respect to the standard position, as a result, the upper view can not be obtained as a result, it is effective in securing sufficient front visibility Demonstrate.
The field of view that allows you to look over the way to the exit of Corner when you are knocking down Machine with a deep lean Angle creates Large Merit for every Rider.

 
内装1502





内装1503By exchanging dividable Pad
Offering outstanding Fit feeling to every Rider


X - Fourteen adopted a new interior system that can be replaced independently, with the center pad, which is the essential part of comfort to wear, divided into six. With this system, the pads of the forehead, occipital region, temporal part, crown part and neck part are made by changing the pad thickness according to the shape of the rider's head (option) , It has become possible to further enhance the fit. In addition, the material of the interior surface has gained popularity in the past, "HYGRAR" excellent in hygroscopic quick drying property and adopts a nice raised material with a nice touch in the hybrid. The cheek pad has E to facilitate removal of an emergency helmet. Q. R. S. Equipped with.



内装1504






■Emergency Quick Release System E. Q. R. S. (Emergency Quick Release System) ■


Emergency Helmet removal system in case of emergency accident

In the unlikely event that an Accident has occurred, it is more difficult for a third party to perform a rescue operation to remove Helmet from Rider.
Not only shock absorbing performance and comfort but also supporting such relief work in emergency is one of Helmet's Large Off function.
E developed by SHOEI. Q. R. S. (Emergency Quick Release System) It is easy to pull the exclusive Ribbon, it is possible to easily remove the Helmet while keeping the burden on the neck with possibility of injury the smallest limit.

* Usually, when removing Cheek Pad for the purpose of Maintenance etc. E. Q. R. S. Please do not use.
 
EQRS




■Ventilation system■

Actively guide the running wind to the inside to efficiently discharge heat and moisture,
Ventilation that can feel the wind

X-Fourteen's Ventilation system is equipped with Air Intake in two places, Front and Upper, in order to demonstrate sufficient effect even in a strong forward-looking posture.
Using the negative pressure efficiently from the Outlet hole in the Top and Rear stabilizer to exhaust hot air.

Furthermore, in X-Fourteen, LowerAir Intake installed at the bottom of the Shield was separated into two lines and a new Air Route was created.
As in the past, the upper Intake has Defferential Gear Ro Star function that guides the running wind to the inner surface of the Shield, and the lower Intake arranges the Air Route to the Cheek Pad where heat and moisture are likely to be trapped, leading the running wind.

 
ベンチレーションシステム




■Shell&Liner■

Size setting of X-Fourteen is to provide 6size up to XS-XXL with a combination of Shell of 4 Size and shock absorbing Liner of 5 Size in order to provide the best feeling for every Rider.

Shell of AIM + structure composed of laminated strong glass fiber and organic fiber can afford clear safety.
In addition to the JIS standard, it also conforms to the latest SNELL standard.



Introduction video of X - 14 is here ↓ ↓

警告
* SHOEI Helmet (Japanese model) weight chart
* All SHOEI products listed on our website are designed for usage in Japan only. Therefore based on safety standards established in Japan, they have been certified for industrial standards such as JIS and SNELL.
* If you are using the helmet outside Japan, use it at your own risk. Please follow the rules and regulations established in each country and area you are in.
* All SHOEI helmets on our website are manufactured for Japanese markets only. Therefore please be careful when comparing the sizes with other SHOEI helmet models sold overseas. Although the size description is the same, the actual sizing and weight may slightly differ.
* The above also applies for SHOEI optional parts. For all SHOEI optional parts, suitability to SHOEI helmets sold overseas have not been confirmed."
* The helmets sold on this site are based on the Japanese safety standard.
We are not responsible for accidents, damage, injury, or any other related matters as a result of purchasing this product.

使用者商品评论

  • 会员评论得分

优秀

(4)

很好

(0)

中等

(0)

较差

(0)

很糟

(0)

  • 平均评分
  • 向其他会员分享您的想法

最新商品评论或相关商品评论  *请注意!! 评论可能会因使用状况不同而异,或是回覆类似的商品和规格。

最近浏览的商品
loading