不需要配线加工
附束带
附安装时需要的专用线束
【组内容】
i-map接头组(零件编号:763-0420100)
普利盘(零件编号:488-0420000)×1
风叶盘(零件编号:488-0420700)×1
压板&滑键(零件编号:488-0420090)×1
普利珠组 12g(6个一组)(零件编号:462-2206120)×1
有机钼润滑脂(5g)(0900-969-00110)×1
【程式】
1 Rev Limit 1100rpm /标准型引擎× JMCA 认定排气管
2 Rev Limit 11000rpm /标准型引擎× JMCA 认定排气管(+5%修正)
3 Rev Limit 11000rpm /标准型引擎× 竞赛用排气管
4 使用者设定程式
*不能使用普通加权滚轮
※所示的转速限制器速度是地图上的设定值。转速限制并不能保证转速会增加到指定的转速。
*预装的油量表不兼容所有的JMCA消声器和赛车消声器。根据客户的车辆在用户地图(地图-4)上设置燃油控制设置。
*制作原图需要一台有网络环境的电脑和一根电脑接口线(763-0500900)。从Kitako网站下载设置软件(免费),在电脑上进行设置。
※安装消声器必须使用比原厂消声器更合适的消声器。
No wiring required
Cable Tie included
Special harnesses required for installation are included
[Set components]
I-map coupler-on set (Part No: 763-0420100)
MOVABLE DRIVE FACE (part number: 488-0420000) x 1
Super drive face (Part No: 488-0420700) x 1
Lamp Plate & Slider (Part No: 488-0420090) x 1
Weight roller SET 12g (6 pcs. 1 SET) (Part No: 462-2206120) x 1
Organic Molybdenum Grease (5g) (0900-969-00110) x 1
[Map]
1 Rev limit 1100rpm / Stock engine x JMCA approved exhaust
2 Rev limit 11000rpm / Stock engine x JMCA approved exhaust (+5% correction)
3 Rev limit 11000rpm / Stock engine x Racing exhaust
4 User Settings Map
*Stock weight roller cannot be used
*The revs shown are the set values on the map.The rev limit does not guarantee that the rpm will increase to the indicated rpm.
*The pre-installed fuel tune map is not compatible with all JMCA mufflers and racing exhaust.Please set up the fuel condition by the user setting map (MAP-4) according to your bike.
*To make an original map, you need a PC with an internet connection and a PC interface cable (763-0500900).Download the setting software from the Kitaco website (free of charge) and set it on your PC.
*Please make sure to use a exhaust with a better exhaust system than stock.