【颜色】
・外框:黑色
・个体:黑色
・LED:白
【尺寸】
・个体:Φ60
・安装宽度:45mm
型式:15000rpm
附件:仪表支架、码表线组
不兼容信息:请注意,本产品不能与以下机型一起使用。
※如果控制摩托车的电路内置在出厂的仪表装置中。(.如果怠速时电压不超过dc10v,则不能正常启动。转动电池电机时不能低于dc8v)。
*将dc6v电瓶车改装成dc12v电气设备时。
※无电池车辆。
*ac12v车辆。
※此车经过改装,发动机消声器等,震动非常大。
※摩托车以外的车辆。
※采用直接点火。
※带外置点火线圈。
※原厂cdi和点火线圈是一体的。
※带有插头帽 "插头线 "的车辆,可提高点火电压。
※携带硅胶线。
※充电部分的原厂电装件进行了改造。
※多缸点火车。
[Color]
・Rim: Black
・Body: Black
・LED: White
[Size]
・Body: Φ60
・Mounting width: 45mm
Type: 15000rpm
Components: Meter mounting bracket, pulse generator
Incompatibility Information: This product is not available for the following models.
*If there is a circuit built into the stock meter unit that controls the motorcycle.
*If you are using a weak battery.(The unit will not start properly unless the voltage at idling is stable at 10 VDC or more.・When turning the starter, the voltage must not fall below 8VDC.)
*When converting a DC6V battery bike to a DC12V electrical system.
*Battery-less bikes.
*AC12V bikes.
*If the engine, exhaust, have been modified to increase vibration to an extreme degree.
*bikes other than motorcycles.
*When there is a lot of noise in the power supply or pulse signal.
*Bikes with direct ignition.
*For bikes equipped with an aftermarket ignition coil.
*bikes with stock CDI and ignition coil integrated.
*The bike is equipped with a plug cap, plug cord, arching to strengthen the ignition voltage.
*For bikes with silicone cord.
*bikes with modified stock electrical components in the power generation to charging section.
*Multi-cylinder point ignition bikes.