- 符合:
- HONDA ZOOMERX All Years JF52 Kitaco Φ27|Φ30 Front Fork Kit (173mm Pitch) Fits
- HONDA APE 50 NO.AC16-1000001-1599999 Compatible with KITACO Φ27|Φ30 Front Fork Kit (173mm pitch)
- HONDA APE 50 (FI Vehicle) NO.AC16-1600001- KITACO Φ27|Φ30 Front Fork Kit (173mm pitch) Compatible
- HONDA APE 100 TypeD HC13 All models Kitaco's Φ27|Φ30 Front Fork Kit (173mm pitch) compatible
- HONDA APE 100 All Years HC07 KITACO Φ27|Φ30 Front Fork Kit (173mm Pitch) Fits
- ...和更多.
Quality and texture information products are empty in the center be neatly finished
Regarding the feeling of use, the stiffness of the body is not immediately known, but it was replaced because it wa...阅读更多 - 符合:
- HONDA XR50 Motard (MOTARD) AD14 [Genuine Part Number]51490-GAA-305 Qty2 [Model Name]XR50M7 [Type]J/2J
- HONDA XR50 Motard (MOTARD) AD14 [Genuine Part Number]51490-GAA-305 Qty2 [Model Name]XR50M5 [Type]J/2J
- HONDA XR100 Motard (MOTARD) HD13 [Genuine Part Number]51490-GAA-305 Qty2 [Model Name]XR100M8 [Type]3J/4J
- HONDA CB125T JC06 [Genuine Part Number]51490-KC1-305 Quantity 2 [Model Name]CB125TF
- HONDA Broad (BROAD) AF33 [Genuine Part Number]51490-GAA-305 Quantity 2 [Model Name]SCX50S-III [Type]3J
- ...和更多.
[How is it used?Oil was seeping from the front suspension of my 2012 PCX.I should have overhauled it right away because if the oozing oil adheres to the caliper or brake disc, it could cause a problem...阅读更多 - 符合:
- HONDA XR50 Motard (MOTARD) AD14 [Genuine Part Number]51490-GAA-305 Qty2 [Model Name]XR50M7 [Type]J/2J
- HONDA XR50 Motard (MOTARD) AD14 [Genuine Part Number]51490-GAA-305 Qty2 [Model Name]XR50M5 [Type]J/2J
- HONDA XR100 Motard (MOTARD) HD13 [Genuine Part Number]51490-GAA-305 Qty2 [Model Name]XR100M8 [Type]3J/4J
- HONDA CB125T JC06 [Genuine Part Number]51490-KC1-305 Quantity 2 [Model Name]CB125TF
- HONDA Broad (BROAD) AF33 [Genuine Part Number]51490-GAA-305 Quantity 2 [Model Name]SCX50S-III [Type]3J
- ...和更多.
For Grom JC92 (As a substitute for 51490-KRM-852) I bought this product in the US, but no matter how hard I pulled on it, the oil seal would not go in. The description is false, so please fix it. I wa...阅读更多 - 符合:
- HONDA
- HONDA GROM (MSX125)
When I installed the Separate handle and Lowdown Kit of Composimo, only the texture of the Front fork top bolt did not match, so I installed the Front fork cap of Aluminum.阅读更多 - 符合:
- HONDA ZOOMERX All Years JF52 Kitaco Φ27|Φ30 Front Fork Kit (173mm Pitch) Fits
- HONDA APE 50 NO.AC16-1000001-1599999 Compatible with KITACO Φ27|Φ30 Front Fork Kit (173mm pitch)
- HONDA APE 50 (FI Vehicle) NO.AC16-1600001- KITACO Φ27|Φ30 Front Fork Kit (173mm pitch) Compatible
- HONDA APE 100 TypeD HC13 All models Kitaco's Φ27|Φ30 Front Fork Kit (173mm pitch) compatible
- HONDA APE 100 All Years HC07 KITACO Φ27|Φ30 Front Fork Kit (173mm Pitch) Fits
- ...和更多.
Installed on APE 100TypeDSpec Grease the front tire up to the point where the jack is placed under the belly to see if it will float or not The only thing to do is to replace the OEMI was concerned th...阅读更多 - 符合:
- HONDA
- HONDA GROM (MSX125)
high quality parts,machining works and anodization are perfect.
very light(116 grams/pair) compared to the stock steel caps(360 grams/pair).
shipping to Belgium was fast(10 days with economy mail).
...阅读更多 - 符合:
- HONDA ZOOMER-X JF52
This long wheel base kit is really good! very well made and accurate. The really pain in the ass is that you have to undress all the plastics, its a 2 day job if you are doing it alone but is you have...阅读更多 - 符合:
- HONDA ZOOMERX (JF52-1000001-)
- HONDA ZOOMERX (MLHJF382) (Thai model)
- HONDA Zuma X (MLHJF382)
- HONDA Zuma X (JF52-1000001-)
Thank you for your prompt response.The product is very good and I like it very much..It is good to use hardness in five stages阅读更多 - 符合:
- HONDA ZOOMER-X JF52
It took quite a while to install, you need to remove almost all the cowl (The required time is about 5h) , It took time to install without a jack, the hole did not fit, eventually it fell down and it ...阅读更多 - 符合:
- HONDA ZOOMERX (JF52-1000001-)
- HONDA ZOOMERX (MLHJF382) (Thai model)
- HONDA Zuma X (MLHJF382)
- HONDA Zuma X (JF52-1000001-)
I have difficulty installing it surprisingly, I have to take off Cowl pretty well. Although I expected Lowdown, there was not much effect at about 10 mm. It is a good point to be able to adjust the ha...阅读更多 - 符合:
- HONDA
Spring is blinking even at the lowest rate Brown hard Brown hard.It moves because Damper is soft because it moves.It is better to shrink Spring at Turnbuckle better movementThe hardness of this Spring...阅读更多 - 符合:
- HONDA ZOOMERX
We changed to OEM because the movement of the OEM suspension is not good enough. As a result I was good to change. I can also adjust the damping force so I think it's fun to change it for every Si...阅读更多 - 符合:
- HONDA LEAD125
- HONDA DIO110 11-15 [Year]11.July-15.February
- HONDA DIO110 15- [Year]15.3-[Model]JF58-1000001-]
- HONDA ZOOMERX
- HONDA SCOOPY CLUB12 (Thai vehicle)
Although it is said that it is slightly harder than OEM, I felt that the bottom thrust during running was lost. Although it is an attachment, since Key cylinder which opens and closes Seat becomes an ...阅读更多 - 符合:
- HONDA ZOOMER-X (Thailand model)
- HONDA ZOOMER-X (JF52-1000001-)
- HONDA GROM (MSX125) (Thailand model)
- HONDA GROM (MSX125) (JC61-1000001-)
Front fork seems to be down by 10 mm, but I do not feel that in particular, I like the calm design that does not claim too much in Glaringly.阅读更多