- 符合:
- KAWASAKI Z1000R 17-19
- KAWASAKI Z1000 03-16
- KAWASAKI VULCAN S CAFE 17-22
- KAWASAKI Ninja H2R 15-23
- KAWASAKI VERSYS 1000 12-18
- ...和更多.
These grips were purchased for a customer who wanted a little more bling on their bike. The copper colour was the one they wanted. Searching Webike and found these fairly easily and at a better cost t...阅读更多 - 符合:
- HONDA CB500X
- HONDA CB300R
- HONDA CB500F
- HONDA CB150R
- YAMAHA XSR700 17-21
- ...和更多.
I purchased 2 of this product. However, it is oriented in the same direction. Does this product have no distinction between left and right?阅读更多 - 符合:
- SUZUKI GSX250R 18-21 *A separate Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI V-STROM650 07-09|12|14-19 DL650/K7/K8/K9/L2/L4/L5/L6/L7/L8/L9 *If you have Kijima throttle pipe part number 201-5371 separately
- it will be useful for installation.
- SUZUKI GSX-S1000 17-18 L7/L8 *Special Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI GSX-R750 08-09|11-19 K8/K9/L1/L2/L3/L4/L5/L6/L7/L8/L9 *If Kijima throttle pipe part number 201-5371 is separately available for installation
- ...和更多.
This is 3rd time i use Kijima grip heater.
I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without ad...阅读更多 - 符合:
- Others Universal
- HONDA CB1100SF 00-01 [Model]X11
- HONDA CB125R 18 [Model]JC79-100
- HONDA CB1300 SUPER FOUR 05
- HONDA CB1300SB 14-19 [Model]SC54 AE
- ...和更多.
I replaced the old grip on my Suzuki Hayabusa with Kijima grip rubber. The grip is soft and resilent I can easily control the throttle. Hight quality and good price compared to performance.阅读更多 - 符合:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...和更多.
Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips!
I have good luck with most all webike products.
I purchased 1 of these along with the associated heated lock...阅读更多 - 符合:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...和更多.
There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful
I'm willing to install it on my other bike.阅读更多 - 符合:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...和更多.
Second time use kijima heated grip. I used gh08 last time and this time gh10.
It is quite easy for install and internal switch makes handle bar clean.
Highly recommend this heated grip.阅读更多 - 符合:
- KAWASAKI KH250 ALL MODEL
- HONDA Silver wing(ALL MODEL)
- HONDA Night Hawk(ALL MODEL)
- HONDA DIO(ALL MODEL)
- HONDA CREA(ALL MODEL)
- ...和更多.
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The materia...阅读更多 - 符合:
- HONDA CB500X
- HONDA CB300R
- HONDA CB500F
- HONDA CB150R
- YAMAHA XSR700 17-21
- ...和更多.
It's a very high quality product.
No additional brackets required, with basic accessories.
It fits very nicely~!^^
If you tighten the screws well after securing them, they will be secured very firmly...阅读更多 - 符合:
- KAWASAKI ZZR 600 93-00
- KAWASAKI ZXR 400 91-
- KAWASAKI ZX-9R 98-99
- KAWASAKI ZR 7 99-
- KAWASAKI Z750 S 04-06
- ...和更多.
Lever is not wide enough to get your 4 fingered gloves on it. Pinky slips off all the time. If you only have 3 fingers it would be OK.阅读更多 - 符合:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...和更多.
My motorcycle is HONDA CB650R, and I have always wanted to modify a heating handle. I am afraid of buying bad products on other websites, so I bought this KIJIMA heating handle from webike. This heati...阅读更多 - 符合:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...和更多.
KIJIMA VANS x CULT Collaboration Grip 7/8-inch
It goes well with the blue w800.
I'm very satisfied with the harmonious color.
The grip is moderate and not slippery.
It became a better w800 with a uniq...阅读更多 - 符合:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...和更多.
这款我在webike购买的KIJIMA(田岛)VANS × CULT 7/8”握把套,安装在我的川崎Ninja ZX-6R上很合适,这是一款联名的握把套,结合VANS经典纹路,抓握很舒适。阅读更多 - 符合:
- HONDA CB500X
- HONDA CB300R
- HONDA CB500F
- HONDA CB150R
- YAMAHA XSR700 17-21
- ...和更多.
我的摩托车是KAWASAKI Z900RS,这台车原厂后视镜非常的普通,完全不符合复古车的气质,我在webike上购买了这款TANAX BAREN NEO后视镜,圆形的镜片银色本体,适合把手内径14.17-18mm的车辆安装,安装完后摩托变得帅气了阅读更多 - 符合:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...和更多.
我的摩托是YAMAHA XMAX300,一直都想改装一款加热手把,在别的网站上害怕买到不好的产品,所以我在webike上购买了这款KIJIMA加热手把,这款加热手把支持各种型号的摩托安装,安装简便,需要注意的是需要专业人士接线。实际体验后加热效果很好。阅读更多 - 符合:
- KAWASAKI KH250 ALL MODEL
- HONDA Silver wing(ALL MODEL)
- HONDA Night Hawk(ALL MODEL)
- HONDA DIO(ALL MODEL)
- HONDA CREA(ALL MODEL)
- ...和更多.
Recieved these grips quickly, I am in the United States. Excellent quality and feel great in your hand. Will buy more in the future. 阅读更多 - 符合:
- HONDA CB1000R 18-21
- HONDA CB1100 10-21
- DUCATI SCRAMBLERICON 14-
- HONDA 400X
- HONDA CB500X
- ...和更多.
All you can find in the TR these days are tiny low-profile mirrors with terrible field of view. I’ve ridden Napoleons for 5yrs and love the shape and size. When one of them broke last month, I was so ...阅读更多 - 符合:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...和更多.
I live in Canada and heated grip are not a luxury. It allows me to use my motorcycle a few additional months. These grips are great quality, easy to install and offers allot of heat settings to make m...阅读更多 - 符合:
- KAWASAKI Z900 17-22
- KAWASAKI VERSYS650 15-22
- KAWASAKI Z650RS 22
- KAWASAKI Z650 17-22
- KAWASAKI NINJA650 R 17-22
- ...和更多.
I have been using ZEAT Levers in successive generations of Motorcycle, and I am very satisfied with the high quality of the product.Unlike clutches, brake levers are very easy to replace.阅读更多 - 符合:
- KAWASAKI ZX-6R 19-21
- KAWASAKI ZX-25R 20-21
- KAWASAKI ZR-7S 99-05
- KAWASAKI ZEPHER750 91-06
- KAWASAKI Z900RS CAFE 18-21
- ...和更多.
I have been using ZEAT Levers in successive generations of Motorcycle, and I am very satisfied with the high quality of the product.However, replacing the clutch lever on the 25R was a bit troublesome...阅读更多