- 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...阅读更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...阅读更多 - 符合:
- YAMAHA Cerro 225W 93-96
- YAMAHA CELLOW 225 85-93
- YAMAHA Selo 225S 92
- YAMAHA Cygnus 125 95-01
- YAMAHA artesia 91-92
- ...和更多.
[How is it used?I used it for VINO125 made by YAMAHA in Taiwan.Since there was an impression that the effect changes for Large when the Golden Pad is put in Scooter from old times, this time, too, thi...阅读更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
I replaced a 2006 K7 OEM BreederValve with a fluid blotch in the OEM BreederValveIt is made of stainless steel and looks greatI don't know if seal tape is necessary, but just in case阅读更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
No functional problemsIt's a hobby to change from OEM as it's not used very oftenThe front brake is compatibleI installed it on a non-compliant rear brake for a test run, but the Fluid leakedThe OEM h...阅读更多 - 符合:
- YAMAHA BRONCO225 97-00 Front
- YAMAHA SEROW225 WE 97-04 Front (Model:5MP1)
- YAMAHA SEROW225 W 93-96 Front (Model:4JG1-6)
- YAMAHA SEROW225S 92 Front
- YAMAHA TW225 02-06 Front
- ...和更多.
It works normallyI didn't even get a blur or JudderOf course, it doesn't particularly improve braking powerThese are very cheap Repair Parts for Restore阅读更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
I used it in a Tokico 6-pot, and since the Screw was with me, I figured I could use it! Brake fluid leaked and it was Large Please be careful There is no problem in the product阅读更多 - 符合:
- YAMAHA Selo 225S 92
- YAMAHA Cerro 225W 93-96
- YAMAHA Cygnus 125 95-01
- YAMAHA CELLOW 225 85-93
- YAMAHA TZR50R 93-99
- ...和更多.
Although I tried various Manufacturer 's pads, if you buy it at the shop, you can not find cheap things inside, but there are uneasiness as to whether it is not a bad product even if it is on some...阅读更多 - 符合:
- Others Silver Fox 50 06 ADLY Rear
- capacity:1 caliper
- Others Super Sonic 100 04-05 ADLY Rear
- capacity:1 caliper
- Others Super Sonic 50 00-06 ADLY Rear
- ...和更多.
BRONCO's Rear is Drum.At that time, SEROW 225, which became Base, remembered that it was made into discs, but BRONCO emphasizes fashion characteristics (But it's dirty) Because it looks like S...阅读更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
Because it rusts as soon as iron, Material : I purchased Stainless Steel. We are solidly making details, we are satisfied with Large change. I am happy that it's a bit cheaper.阅读更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
【What made you decide the purchase?】OEM's RadarBolt was rotten w【How was it actually used?】Cool at One point【Mounting was difficult?】Just replace with OEM【Please tell me the installation point and...阅读更多 - 符合:
- YAMAHA Cerro 225W 93-96
- YAMAHA CELLOW 225 85-93
- YAMAHA YSR80 86-88
- YAMAHA Cygnus 125 95-01
- YAMAHA artesia 91-92
- ...和更多.
Purchase for Front brake. (There is only Front.. ) Previously SBK (Black) Although I was using, I was concerned about the sweetness of the effectiveness of the initial movement. If you return to the u...阅读更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
It was used for the SEROW225 WE.Although there was no leak at the time of OH of the Front brake, since rust was conspicuous with degradation also in model, it exchanged. Since it changed, brake perfo...阅读更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
I tried to carry out air-bleeding, nothing did come out... When an air breeder was removed, it was choked up with rust. Although I cleaned rust, I exchanged it. Especially an old motorcycle needs to c...阅读更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
Pure iron rusted easily because of [ of the brake fluid ] hygroscopic property, and since it made rust with a stage in the taper part moreover, it was exchanged. Although the rust of the aluminum by e...阅读更多 - 符合:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...和更多.
It purchased in order for a pure breeder's seal efficiency to become weak and for exhaust air to flow backwards. It can be satisfactorily used with an 8-mm spanner, and user-friendliness also has no p...阅读更多