- Installed on GB250 CLUBMAN.Since it could not be attached as is, the pin side was shaved 5mm using a grinder. If the amount of shaving is wrong, the angle will be wrong.The footpeg rubber is not remov...阅读更多
- I used it on my XG250 TRICKER quite some time ago, but recently I have been storing it in my Parts storage, forgetting how easy it is to use Tatsumi's Change cover.The W800 OEM Change Pedal had a hard...阅读更多
- 符合:
- KAWASAKI Varios 2 91-08
- KAWASAKI barios 91-08
- KAWASAKI Ninja 250R 08-09
- KAWASAKI Zephyr X 96-08
- KAWASAKI Zephyr 750RS 91-06
- ...和更多.
I put it on my A7. The rubber of the original footpeg was hard and slippery, and the gold part was badly corroded and dirty, so I decided to replace it with Other Brand Product.It looks similar to the...阅读更多 - 符合:
- KAWASAKI Varios 2 91-08
- KAWASAKI barios 91-08
- KAWASAKI Ninja 250R 08-09
- KAWASAKI Zephyr X 96-08
- KAWASAKI Zephyr 750RS 91-06
- ...和更多.
I was able to install it without any problems. It was fully compatible with the GPZ900R-A7's Normal step. The spring that came with it was Exactly, but the pin was too long, so I used the Normal sprin...阅读更多 - I replaced the soft, airy footrest of the Yamaha MT-01 with this SolidRubber one.However, as shown in the note, when the Pin is Crimp, it is necessary to remove and replace it by shaving off, and the ...阅读更多
- 符合:
- HONDA
It was impossible to install on CB250R. I have to throw it away. It was a waste of money. Please be careful everyone.阅读更多 - 符合:
- KAWASAKI Ninja 250SL 15
- KAWASAKI Ninja 250 13
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
Position will vary slightly.It's attached diagonally up and back.I thought it would be cooler if the bars were straight out wGood product for the price.I tried it out and I think the quality of the pr...阅读更多 - 符合:
- KAWASAKI Ninja 250SL 15
- KAWASAKI Ninja 250 13
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
I bought it for the ninja1000SX 2020.The OEM with Rubber does not have to transmit vibration.I bought it because it is too heavy and the bottom of Boots and the Rubber catches too much on each other.T...阅读更多 - 符合:
- YAMAHA YZF-R6 99-08
- YAMAHA YZF-R25 15
- YAMAHA YZF-R1 98-03
- YAMAHA XJR400R 93-08
- YAMAHA XJR400 93-08
- ...和更多.
I installed it on a 2016 MT25. The installation itself can be done without any problems, but it is much longer than the OEM footpegs and harder to ride. In addition, the installation part protrudes ou...阅读更多 - 符合:
- KAWASAKI Ninja 250SL 15
- KAWASAKI Ninja 250 13
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
As a person who wears racing boots even when touring, I'm not a fan ofPedal is far from subtle in both Z250SL OEM footpegs.I've been wanting to do this before, just for a minute.I found this one and s...阅读更多 - 符合:
- YAMAHA YZF-R6 99-08
- YAMAHA YZF-R25 15
- YAMAHA YZF-R1 98-03
- YAMAHA XJR400R 93-08
- YAMAHA XJR400 93-08
- ...和更多.
I used it on my THRUXTON 900.Triumph is made in the United Kingdom on a United Kingdom man's Height Base, and for further Rear SetsKnee grip is very strict and the knee is too low, and the knee is too...阅读更多 - 符合:
- HONDA
這腳踏的外型很帥氣的,但安裝時出產商沒有提供安裝的零件,用回原裝的零件又裝不上,要額外買零件裝上,但很不幸,把這腳踏裝上後,他沒有原裝的牢固,鬆鬆的,因為它的腳踏鑽孔太細,不可用回原裝,要買一條細的才可裝上,評價真是一般般。
The shape of this pedal is very handsome, but the manufacturer did not provide the ins...阅读更多 - The Madmax foot pedal cover is an awesome addition to a cool bike! I get more comments about it than I expected. It is a littl bit heavy, but it fits great and gives more area on the brake pedal for y...阅读更多
- 符合:
- SUZUKI Bandit 1250S 07-08
- SUZUKI Bandit 1250 07-08
- SUZUKI Bandit 1200S 06
- SUZUKI Bandit 1200 06
- SUZUKI GSX1400 01-08
- ...和更多.
The footpegs are solidly built, look good and feel great to ride with. They allow for slightly more lean angle due to the lack of sliders underneath the pegs. However, one of the pegs comes loose over...阅读更多 - 符合:
- HONDA PCX125 10-21
- HONDA PCX125 11-21
- HONDA PCX150 (KF12)
Very nice products.Royal Rất thích nó, nhưng vận chuyển về Việt Nam quá cao hơn giá trị sản phẩm. Các bạn có thể hỗ trợ chuyễn giao dịch không? Very Luigi special products on the elevator thật tiếc .....阅读更多 - 【What made you decide the purchase?】 There is only this in the old car.【How was it actually used?】 Large kimono is also Just fit.【Was it difficult to install? (Hard parts case)】 There is a need to rem...阅读更多
- 符合:
- HONDA PCX150 (KF18) *Not available for KF12
- HONDA PCX125 (JF56) *Not available for JF28
As it will be sent in a flat state, you must bend yourself.It is difficult to draw a curve. Sure enough, a gap has been created.Just peel off the OEM's Rubber, just install the Bolt and Screw.Alth...阅读更多 - It is normal as a product. There is yzf - r25 in conformity, but mt - 25 (Yzf - r25 as well) You can not attach a ponto. OEM Radial ball and Spring will not enter. I added it by expanding the diameter...阅读更多
- 符合:
- HONDA glom (MSX125)
OHLINS is bad Copy goods.There are many defect reports reported on this siteThe most severe thing is that the core in the middle is broken and it is extremely dangerous* The image is already p for peo...阅读更多 - 符合:
- KAWASAKI Ninja 250SL 15
- KAWASAKI Ninja 250 13
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
Excellent for COSPA. At this price you can not buy at other Manufacturer. The appearance changes at once. Instructions are not included, but installation is easy as it is the OEM street.阅读更多