- 符合:
- HONDA
- HONDA
I bought these nuts on the Honda SuperCub and Monkey - they fit both motorcycles. They are not expensive, but they protect the screw from harmful influences from below. The quality is good.
Купил эти...阅读更多 - 符合:
- HONDA
- HONDA
Приобретал для защиты от коррозии шпилек крепления глушителя к цилиндру на своей Honda monkey. По качеству все отлично, загрутились хорошо, внешний вид шикарный. Рекомендую к приобретению….
I purchase...阅读更多 - I bought and installed this product in hopes of muffling the noise of the Exhaust System.It works, and I'm satisfied that the volume is as low as I can allow it to be.It's also good that it doesn't sp...阅读更多
- The stainless steel material is very strong and resistant to rust, so it will stay clean forever.阅读更多
- [Car body] 06 CB400SF Vtec3The silencer of SP Tadao's Full Exhaust System was replaced with UCP's Universal Silencer.The Baffle that came with it was too loose and the exhaust sound cracked in the nor...阅读更多
- 符合:
- HONDA
- HONDA
[How is it used?I used it as Exhaust Nut of VINO125 of Taiwan YAMAHA.Was the one you received as per Image?Nut as shown in the picture.Was the installation difficult?Just attach to Bolt! Easy installa...阅读更多 - 符合:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA livudio J
I bought it because I replaced the exhaust system for the refresh of LIVE DIOZx.This is a necessity for Exhaust System replacement.It's a few hundred dollars, so use it, don't use it, and make it new....阅读更多 - 符合:
- HONDA
- HONDA TODAY. fe
- HONDA ZOOMER(ruckus)
- HONDA ZOOMER(ruckus) fe
- HONDA SmartDio (4ST)
- ...和更多.
After purchasing it, I lost it temporarily and had no choice but to purchase another Manufacturer's and a liquid Gasket at the Shop, but found it soon after.Thanks to this, I recognized the quality of...阅读更多 - 符合:
- HONDA CBR1000RR
- HONDA CB1000 SF (Big One)
- HONDA CB1300 SF
I bought it in conjunction with the CB1300 to Full Exhaust System.It's a solid product and works well as a gasket with no exhaust leaks no matter how you run it or how you open the Axel.阅读更多 - I used it on the AKRAPOVICSilencer in HUSQVARNA.I pulled out the OEM Baffle and installed it.Size is exactly as shown and there is not much to say about the performance etc.The sound is quieter now th...阅读更多
- 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
I used it to replace the external exhaust system!Installation was no problemIt will be a necessity for an oil change and I'll be buying it again!阅读更多 - 符合:
- HONDA CBR250R 11-
I had previously purchased a CB250R'19 exhaust system from OEM. I had the opportunity to change to Yamamoto racing's Full Exhaust System Used.I am using it to great effect.I've been able to use it for...阅读更多 - 符合:
- HONDA
- HONDA TODAY. fe
- HONDA ZOOMER(ruckus)
- HONDA ZOOMER(ruckus) fe
- HONDA SmartDio (4ST)
- ...和更多.
I had an OEM gasket to compare this one to and there was no noticeable difference between the two. The fit was perfect, no leaks.阅读更多 - 符合:
- HONDA
- HONDA
- HONDA
- HONDA
Gasket is sold by several manufacturers in addition to OEMs, butI made it to POSHI haven't compared multiple Manufacturer's Gaskets, and good or bad I don't knowBut I have not had any problems with PO...阅读更多 - I didn't have it in stock and it was only available in a narrower width, but I still preferred the wider widthThere is a smell at the beginning of use, but the smell goes away after a while, so no pro...阅读更多
- 符合:
- HONDA
- HONDA
- HONDA
Exhaust of Other Brand Product from OEMExhaust System I purchased it to ensure that there were no exhaust leaks when I changed to the SystemI chose it because it was cheaper than the OEM product and t...阅读更多 - 符合:
- HONDA
- HONDA
The OEM Bolt was rusty, so I bought this oneThe shape is good, and you can use this product to install a customized exhaust systemRecommendationIn the MONKEY that I used to ownSome of them could not b...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
I am attaching it now, the StrikerStreet concept, every time Oil Element exchangeI have to remove them all, but OEM and key ○ Unlike KoSince there is no Gap at the time of installation, it will not ca...阅读更多 - At first I purchased it for MONKEY,Because I wound a different Vantage, now I am wrapping around BW'S for the purpose of hiding rust.It is easy to wind as much as the width is thin.I do not know a...阅读更多
- I used it for the Glass Wool exchange of the Exhaust System of LIBRA ☆ PROExhaust Chamber used for NSR 50.Until now DAYTONA's 250 x 700 Size is Quantity : 1pc. Although it was using, Glass Wool is...阅读更多