- Is a great tool to adjust the rear shock compared to using a screw driver and a hammer.It would have been extremely difficult and time consuming to preload springs without this tool.Recommend getting ...阅读更多
- This tool is multi-purpose; You can use it to remove the variator, flywheel, front sprocket and clutch.
This was purchased to enable me to remove the front sprocket for bike. Although it did work, it ...阅读更多 - An excellent cable lubricator. I have already tried it, it lubricates well, it can be used for any of your equipment, it is very convenient.
I recommend it to everyone.
Отличный смазчик троссов. Уже ...阅读更多 - 符合:
- SUZUKI RM-Z450 10-17
- SUZUKI RM250 07-08
- SUZUKI RM125 06-08
- SUZUKI RM-Z450 05-21
- SUZUKI RM-Z250 07-15
- ...和更多.
Each job needs the correct tool to work on motorcycle, this tool made it easy, plus there was no damage to the aluminum nut. Be aware that these may not fit on the fork cap when in the triple clamp, s...阅读更多 - I have dirtbikes and all the forks are different sizes. Finally bought this tool and now I can have one tool for many applications. I have used it twice and worked great. Stores in a small box and cle...阅读更多
- outer fork tube clamp has a threaded lever on the side of the clamp that closes its jaws tightly on the fork. You can even remove the threaded lever from the outer fork tube clamp, so that the fork tu...阅读更多
- 符合:
- HONDA DAX 125 All JB04 models
- HONDA MONKEY125 All JB02 models/All JB03 models
- HONDA glom HRC Race Base Car
- HONDA glom All JC61 models/All JC75 models/All JC92 models
About quality and texture, I can confirm that the quality is great and that the materials used is a mixture of aluminum and steel that makes up the kit. About the feeling of use, This fork tool kit su...阅读更多 - Easy to use, clear markings on the tube. My only complaint is that the tube and hosing can separate when attempting to push fluid out of the syringe back into the fork oil container too quickly and cr...阅读更多
- my only critic would be that the writing for me was small and had to really focus to gauge my levels.
Another one of those tools you don't really need but makes the job of adjusting fork oil levels a ...阅读更多 - Package arrived quickly and safely from Webike! This tool is a must for anyone replacing the clutch on old Honda CT70s with semi automatic transmissions. This will fit 1/2 drive socket wrenches or co...阅读更多
- About quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of u...阅读更多
- About quality and texture
Данный инструмент полностью выполнен на чпу станке из цельного куска алюминия и состоит из четырех частей, прижимная пластина и сам корпус, также резиновая манжета и затягива...阅读更多 - This is the oil slinger flywheel tool called for in the factory manual. It's perfect fit and like every genuine Japanese tool Ive ever used including woodworking, It's flawless.阅读更多
- Давно хотел приобрести смазчик для тросов, выбор пал на KIJIMA. По материалу все понравилось, работать с ним удобно. Функция отлично выполняется, хорошее соотношение цена/качество...
I have long wante...阅读更多 - About quality and texture, I can confirm that the quality is great and that the material used is steel with a mixture of finishes, black coating, plating and rubber.
About the feeling of use, No pro...阅读更多 - This tool does what you want if you use it for its intended purpose. I bought the Husqvarna flywheel to hold while tightening the nut. Some said it failed and didn't do its job. Don't use it to change...阅读更多
- After using this for quite some time, I discovered that it handled better on my hands than a 9-1/2,But due to its narrow width, when closed, I find it easier to strip conductors like #12AWG as my fin...阅读更多
- 摩托车的链条需要经常清洗上油,去车行清洗挺贵的,所以我自己买了这款unicar 清洁刷自己清洁链条,这款刷子的刷头有一定的倾斜角度,操作起来还比较好用,尼龙塑料制品也比较结实,不会折断。特别需要注意的是自己清洁链条一定不要启动发动机,不然你的手指会受伤!阅读更多
- High quality flywheel puller. Motion pro always produces quality products that do the job! It's pretty cheap, so don't try to lift your flywheel. Take the hammer and do it right. I've used this hammer...阅读更多
- Quick to adjust, excellent hold on the clutch to tighten nut. I would definitely recommend this product (tool) for anyone working on bike engines and proper maintenance on their bikes.
Used on both my...阅读更多