排气管垫片2个入
商品 # 963-1000012
海淘直邮价(不含运费&税费)
26.18 RMB (548 日元)
定价 29.05 RMB 节省 10%
+5 Webike点数 (0.23 RMB)
商品 # 963-1000012
海淘直邮价(不含运费&税费)
26.18 RMB (548 日元)
定价 29.05 RMB 节省 10%
+5 Webike点数 (0.23 RMB)
非常适合改装Cafe Racer 风格的车款!
提供接近原厂烤漆的商品颜色选择。
●可以透过单座壳上的锁具来卸下坐垫
●卸下坐垫后,单座壳内可以存放一些小物;容量约为6 L
●可以与后货架共同使用
●可以存放原厂的U 型锁
●可以存放原厂的随车工具
适配车型链接
Fits: HONDA CB125T JC06-1100001-1312302 Number of uses X2, HONDA CB223S All MC40 models used X1, HONDA CB400SS All NC41 models Number of uses X2, HONDA CBR125R All JC50 models used X1, HONDA CBR250RR (MC22) All models used X4
The exhaust pipe had been installed and the flange was bent due to over-tightening.
The Gasket was still crushed and stuck to the Cylinder.
With the Pick tool, I forced it off by sticking the Pick while pulling on the Gasket.
Cylinder was cleaned with foam Carburetor cleaner and Dustcloth, and exhaust pipe was cleaned with Oil stone.
When installing the Gasket, it is best to install it on a slightly inclined surface with the Front facing up so that the Gasket will not fall off.
Put in a new Gasket, tighten the exhaust pipe by hand, and set the Quantity:Pair (for Left and Right) Tighten it to even etc.
If you get to the point where it will not tighten, adjust the exhaust pipe up or downQuantity:Pair (for Left and Right) The first time, the client shakes the machine to see if it is settled. Then tighten it again by hand.
When it got to the point where I couldn't tighten it anymore, I tightened it with an Offset wrench at about 90-degrees to 180-degrees to even etc.
If there are no exhaust leaks, the system is complete.
I think it is loose, so I recommend checking regularly or double nut. If you tighten it too much, it is not the end of the world.
I did not take pictures of the work since it is a friend's vehicle.View Detail
Fits: HONDA CB125T JC06-1100001-1312302 Number of uses X2, HONDA CB223S All MC40 models used X1, HONDA CB400SS All NC41 models Number of uses X2, HONDA CBR125R All JC50 models used X1, HONDA CBR250RR (MC22) All models used X4
Dropping Carbon in the exhaust system in the rainy weather.
Naturally, the exhaust system has to be removed and the gasket has to be replaced.
It was cleaned because Carbon has accumulated in the Exhaust System.
It will stick to you again soon enough, but...
We've all had the experience of the Gasket falling off when installing an Exhaust System, and I guess.
It was a thing again, LOL.
I'm not sure about the performance of the Gasket itself, but I don't think it's much different than the OEM. It is.
However, after removing Carbon, I feel that the Engine is now in better shape.View Detail
Fits: HONDA CB125T JC06-1100001-1312302 Number of uses X2, HONDA CB223S All MC40 models used X1, HONDA CB400SS All NC41 models Number of uses X2, HONDA CBR125R All JC50 models used X1, HONDA CBR250RR (MC22) All models used X4
New type CBR 250RR (MC51) I bought the Full Exhaust System of.
Although it seemed that the conformity confirmation was not yet obtained, purchase this here by the original bad.
Old type CBR 250 RR (MC22) There was a statement of. While considering the same size as 4 cylinder, order.
Result It was Don Pissha.
I think that one who is uneasy to purchase an OEM is better, but since it can be installed for the time being and there is no exhaust leakage, I will keep it as reference information.View Detail
Fits: HONDA CB125T JC06-1100001-1312302 Number of uses X2, HONDA CB223S All MC40 models used X1, HONDA CB400SS All NC41 models Number of uses X2, HONDA CBR125R All JC50 models used X1, HONDA CBR250RR (MC22) All models used X4
As it is a HORNET 4 cylinder, it is necessary for four, but as long as I looked at the photograph of the posted item, it was clearly the copper color and Silver color "Quantity : 1 Set of 2pcs. "I only saw it. The text includes Quantity : 1 Set of 2pcs. I wrote that it is, but for myself who need 4 copper colors you can only buy 4 Pack. After all, the same goods that arrived were the same copper color "Quantity : 1 Set of 2pcs. "was.
Eventually I bought eight in 4Pack, and a bit of frustration remained.
There is no problem with the quality and precision of products.View Detail
Fits: HONDA CB125T JC06-1100001-1312302 Number of uses X2, HONDA CB223S All MC40 models used X1, HONDA CB400SS All NC41 models Number of uses X2, HONDA CBR125R All JC50 models used X1, HONDA CBR250RR (MC22) All models used X4
Exhaust System Let's exchange Gasket whenever you replace it or remove it.
Used spinning is the cause of exhaust leakage.
If this is bad it will not be a talk.
It is an ordinary good item.
I pray that you will collapse and not break 1,000 times.View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。