内档板
商品 # BF60WM
商品 # BF60WM
I have a TricksterShotgun silencer installed on my MORIWAKIFull Exhaust System, but the regulations are getting stricter and stricter, so I purchased an inner baffle.
It was not easy to ride after installation, but I was finally able to see the effect of riding.
As for the effect, the volume seems to have changed a little, and I read that the Torque is increased, so I checked that as well when starting off, and I think it is effective because it is easier to start off Smoothly.
If I wanted to turn the volume down a bit more, I would prefer S over M.View Detail
I used it for Tsukiji TR. It is possible to install it like Mr. Tsukigi's Included Parts:even if the nail for the fixation is not raised especially by pontification. I think that the volume is slightly down. (Idling) Low speed Torque is slightly improved (Start is easy) TR tube is explosive sound in the first place, but I wanted it to become quiet a little more. (When I replace the ZX with a good exhaust system, the Idling becomes unstable, but after installing the Baffle, it has calmed down a little. The high speed does not feel the influence so much even if it does not do the fuel tune setting. By the way, when End Baffle is installed, it is quieter than OEM. I am not satisfied with the high price though the production is good including welding.View Detail
It is used in combination with BEETSingle SilencerSlip-on Silencer.
Installation is easy and accurate as shown in the Instruction Manual.
You may think that there is not so much change in the sound deadening effect as you expect, but the lack of torque feeling at low rpm, which is common with the external exhaust system, has been improved and the instantaneous fuel efficiency at cruising has gone up.
There is no clogging feeling at high rpm and the performance of 14R is the same as before. /The performance of 14R is the same as that of 14R, which can easily go out to XX? (Lol)
I thought the price was a bit high, but it worked in terms of performance, so I'm happy with the results!
View Detail
Full Exhaust System, Straight Silencer and after passing through, Torque under the Torque to Skyca....
Besides, because of the Large explosion, buy double wall M Size to expect backward pressure as well as silence effect as well..
It's easy for everyone to ride on Impre street back pressure. Regarding the silencing effect that I was expecting a little bit, it was set up that the exhaust sound was in order, but it is almost ineffective.
In order not to be able to attach Baffle to Silencer, I purchased and installed a 200-Long retrofit additionally, but it has no effect at all.... Next time I will roll the Glass Wool.
View Detail
I attached it to Megaphone Exhaust System of CARKER type. From the normal 60 Φ Exhaust System, this type of Exhaust System was worried whether it could be installed because it is slightly thick, but it was able to install safely. We installed a lot of claws but installed a little clearance between Baffle and Exhaust System so we handled the handheld Glass Wool and dealt with it.
I purchased MBaffle this time but feel like a little silencing effect. Originally this Parts is not intended to mute. The original purpose is to improve the exhaust system's omission. After exchanging for this Baffle obviously improved, it felt like Throttle improved and Torque was up..View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。