标准型 火星塞 CPR6EA-9 6899【日本制造、原装进口】
商品 # CPR6EA-9
商品 # CPR6EA-9
四轮车用的塞子主要有 "集成式 "和两轮车用的 "冲填式",四轮车和两轮车用的都是 "分离式"。
"分离式 "的端子部分脱落,但 "整体式 "或 "冲压式 "的端子部分不脱落。如果你试图强行拆下它,终端部分可能会被破坏。
当把 "分离式 "作为 "螺丝式 "使用时,请取下端子螺母。
在使用端子螺母时,要确保它没有松动,如果松动了,要用钳子拧紧。
【nggk插头的特点】--超 "宽范围 "插头--中心电极采用 "铜芯 "结构,铜芯被封闭在插头尖端附近,以便快速散去大量热量。
因此,实现了既耐烧又耐熏的超 "广域 "插头。比较有铜芯和无铜芯插头的热性能,有铜芯插头的热性能优于无铜芯插头。耐污性好,耐热范围广。塞子的热值--采用热值较高的新型陶瓷--氧化铝瓷作为绝缘体。高温下绝缘性能优良,保证火花。
。优异的导热性能,防止过度烹调。
。热冲击(突然发热。它耐急冷,具有优良的机械强度。-结构坚固、气密性好--绝缘子与主要配件采用特殊粉末连接,具有良好的气密性和结构强度。 电极由一种特殊的镍合金制成,具有卓越的耐久性。- 绝缘体的波纹保证了绝缘性,并防止 "闪络"--在停车时,在终端和主配件之间持续施加高压。
较高的电压往往沿 "绝缘体 "表面泄漏,火花间隙之间所需电压较高,容易引起闪络。
为防止闪络,增加绝缘子表面与主要配件之间的距离,设置绝缘子波纹以固定绝缘子,防止闪络。什么是闪电侠?它是为了在终端和主配件之间产生火花,如图所示。闪过■是什么原因让插头变得优秀。
[Features of NGK plug] |
- This is a super "wide range" plug - |
The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
■ Heat value of the plug |
- High alumina porcelain from New Ceramics is used as the insulator - |
- Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
- Strong and airtight in construction - |
Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
Special Nickel alloy electrodes are used for superior durability. |
- Corrugations in the insulator ensure good insulation and prevent flashover - |
During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
What is a flashover... |
It is a spark between the terminal and the main unit fitting as shown in the image. |
■ Flashover |
■The advantages of the plug |
适配车型链接
Fits: HONDA ANF125 Inova 03-, HONDA Wave 125R Reimportation 【Displacement】125 【Number of units required】1, HONDA Wave 125S Reimportation 【Displacement】125 【Number of units required】1, HONDA Wave 125i 04-, HONDA GROM 13-21
The NGK spark plugs a great and I have never had a problem using them in all my years maintaining my motorcycles. Since they are so cheap to replace I never wait until there is a problem but just change them as recommended by the manufacturer. Good to see Webike have such a huge range of spark plugs available and if you wish to spend more money you can always upgrade to one of the higher quality spark plugs in the NGK range. Do not forget to alway check your spark plug gapping before installation just in case it has been messed up in transit.View Detail
Fits: HONDA ANF125 Inova 03-, HONDA Wave 125R Reimportation 【Displacement】125 【Number of units required】1, HONDA Wave 125S Reimportation 【Displacement】125 【Number of units required】1, HONDA Wave 125i 04-, HONDA GROM 13-21
[How is it used?
I bought this product as a regular replacement for my MONKEY125, which is very active on the street and touring, and I considered the Windshield IRIDIUM, but since I am not dissatisfied with the current situation, I decided to go with the OEM Product.
How was your experience with it?
Engine starts and feels fine to ride.
How did it compare to other products?
I haven't compared it to other products, so no rating.
[Points to note]
Let's get a 16mm Plug wrench. (^^)
Opinions and Requests to the ▼Manufacturer
Nothing in particular, it's a reliable and secure Manufacturer.View Detail
Fits: HONDA ANF125 Inova 03-, HONDA Wave 125R Reimportation 【Displacement】125 【Number of units required】1, HONDA Wave 125S Reimportation 【Displacement】125 【Number of units required】1, HONDA Wave 125i 04-, HONDA GROM 13-21
Installed on JC92.
It was replaced from OEM after driving about 10,000km.
The installation itself is super easy, anyone can do it, no Cowl, no hassle, so I'm guessing it takes less than 5 minutes to do.
Now, let's get down to business. Compared to the OEM, there are some points that can be said to be NGK.
Although the factors in the improvement of response are various, there is a Plug exchange as a thing that can be done easily and cheaply, and among them, the ignition Plug of NGK is sure.
Naturally, the goodness or badness of the ignition plug changes according to the way of riding. My way of riding is town driving, and the number of revolutions runs high rather in Touring Main. Because Throttle response is good even in such a way of riding, I felt that the Torque feeling increases. (I didn't measure the numbers, it's just subjective.)
In this Plug, the person whose ride I can recommend is a street-driven Main. In the city driving where there is a lot of outgoing stop, the better Response of Throttle is, the more comfortable it can run. It can be said that it is a good product especially when it is a town ride in the low rotation range.
However, as others have mentioned in their Reviews, the loss of fire is a bit of a bad sign. It's not a quirky Level that interferes with driving, so if you don't mind, it's not a problem.
I can say that it is a Point that should be meditated on because it is inexpensive.
The approximate replacement time for the Large body is 10,000 km.
As for cost effectiveness, I personally find it to be a pretty good category.
If you are replacing from OEM, I can highly recommend it.
As for the purchase, it's Level you can consider.View Detail
Fits: HONDA ANF125 Inova 03-, HONDA Wave 125R Reimportation 【Displacement】125 【Number of units required】1, HONDA Wave 125S Reimportation 【Displacement】125 【Number of units required】1, HONDA Wave 125i 04-, HONDA GROM 13-21
Not much to say really. But this is the spark plug that comes from Honda on the 2018 Monkey 125cc. Have replaced it at 4000 miles. Earlier then Honda recommend at 8000 miles. The old spark plug looked fine. But for the low price that Webike offer these it is a good idea to keep the motorcycle running well. NGK is my preferred spark plug brand. I have always had a good experience with them and this time is no different. I always like to add a little anti size compound on the initial installation. This one went straight in and the engine fired right up without a problem. Very happy with the product from NGK and the service from Webike. View Detail
Fits: HONDA ANF125 Inova 03-, HONDA Wave 125R Reimportation 【Displacement】125 【Number of units required】1, HONDA Wave 125S Reimportation 【Displacement】125 【Number of units required】1, HONDA Wave 125i 04-, HONDA GROM 13-21
Grom II type already already over 8,000 kilometers
As the misfire began to occur, in order to replace the Plug this time
I bought it. Since it is Normal engine, I replaced it with an ordinary ignition plug.View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。