标准型 火星塞 DP8EA-9 5829【日本制造、原装进口】
商品 # DP8EA-9
商品 # DP8EA-9
四轮车用的塞子主要有 "集成式 "和两轮车用的 "冲填式",四轮车和两轮车用的都是 "分离式"。
"分离式 "的端子部分脱落,但 "整体式 "或 "冲压式 "的端子部分不脱落。如果你试图强行拆下它,终端部分可能会被破坏。
当把 "分离式 "作为 "螺丝式 "使用时,请取下端子螺母。
在使用端子螺母时,要确保它没有松动,如果松动了,要用钳子拧紧。
【nggk插头的特点】--超 "宽范围 "插头--中心电极采用 "铜芯 "结构,铜芯被封闭在插头尖端附近,以便快速散去大量热量。
因此,实现了既耐烧又耐熏的超 "广域 "插头。比较有铜芯和无铜芯插头的热性能,有铜芯插头的热性能优于无铜芯插头。耐污性好,耐热范围广。塞子的热值--采用热值较高的新型陶瓷--氧化铝瓷作为绝缘体。高温下绝缘性能优良,保证火花。
。优异的导热性能,防止过度烹调。
。热冲击(突然发热。它耐急冷,具有优良的机械强度。-结构坚固、气密性好--绝缘子与主要配件采用特殊粉末连接,具有良好的气密性和结构强度。 电极由一种特殊的镍合金制成,具有卓越的耐久性。- 绝缘体的波纹保证了绝缘性,并防止 "闪络"--在停放期间,在终端和主配件之间持续施加高压。
较高的电压往往会沿 "绝缘体 "表面泄漏,火花间隙之间所需电压较高,容易引起闪络。
为防止闪络,增加绝缘子表面与主要配件之间的距离,设置绝缘子波纹以固定绝缘子,防止闪络。什么是闪电侠?它是为了在终端和主配件之间产生火花,如图所示。闪过■是什么原因让插头变得优秀。
[Features of NGK plug] |
- This is a super "wide range" plug - |
The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
■ Heat value of the plug |
- High alumina porcelain from New Ceramics is used as the insulator - |
- Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
- Strong and airtight in construction - |
Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
Special Nickel alloy electrodes are used for superior durability. |
- Corrugations in the insulator ensure good insulation and prevent flashover - |
During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
What is a flashover... |
It is a spark between the terminal and the main unit fitting as shown in the image. |
■ Flashover |
■The advantages of the plug |
适配车型链接
Fits: GILERA Saturno 350 -93, GILERA Saturno 500 -93, HONDA CBR750 Super Aero 87-, HONDA CBX125 84-93, HONDA CBX125F 84-93
As engine oil replacement time of VT 250 Z purchased at secondhand car came, engine oil was exchanged and Idling became unstable from time to time at about 1000 km running ('Д `;)
Since I was told that Plug was exchanged at the time of car delivery, I first suspected Plug cord, but even if I replaced Plug cord, I removed the plug and the Length at the end of the plug was aligned with the new item Although it was Length which is not so much difference, when looking closely, the White part of the tip of the Plug on the Front side was partially missing (' - Ω - `)
The burning color of Plug was extremely White, it was clearly too thin. I wish I had confirmed it at the stage of being delivered - - -.
The rotational speed of the Pilot screw is definitely the same as the OEM, I guess it's nothing but I was wondering if the count was - - - When I looked at the? And the count, DPR - 7EA - 9 was in, so I bought it for purchasing DP8EA - 9 of this OEM 's count by saying that it was the cause (` - Ω - ')
Immediately after the exchanging, although the blow became better, although it was not a single cell departure, it took a little bad condition, but when it left for 10 minutes at Idling, Idling became stable, and 60 km from the run / The distance to h has also become shorter than before (. - Ω - Nono
Since I did not know the cause, I bought this plug which is an OEM Plug, but since my symptoms were improved and I could safely travel, I used the plug now about 10,000 km and Iridium plugs next time I think I will try it ヽ ('▽ `*) A
Those who are suffering from symptoms such as Idling not being stable, a little bad feeling, I would like you to try Plug exchange by all means!View Detail
Fits: GILERA Saturno 350 -93, GILERA Saturno 500 -93, HONDA CBR750 Super Aero 87-, HONDA CBX125 84-93, HONDA CBX125F 84-93
It is satisfactory especially although start-up nature does not necessarily become good suddenly.
It is not simply hard to sell the Plug of this number close.
I think that I will purchase again.View Detail
Fits: SUZUKI GSX-R125 18-21, SUZUKI GSX-S125 17-21, SUZUKI SV650 16-21, SUZUKI SV650X 18-21, SUZUKI V-Strom 650 17-21
스즈키 SV650용으로 여러가지 주문하면서 같이 주문했습니다. 품질좋고 가격도 저렴해서 아주 만족합니다.점화플러그는 품번만 맞으면되니 굳이 비싼가격에 스즈키판매점의 OEM제품이나 온라인몰보다 위바이크에서 구매하는걸 추천합니다.View Detail
Fits: HARLEY-DAVIDSON STREET750/XG750 15-, HARLEY-DAVIDSON XG750 15-, HONDA 400X 16-21, HONDA CB400F 13-, HONDA CB400X 13-21
Cheapest price I could find anywhere on the internet. Defenately Cheaper than in my country. I installed them in my Honda cb500f 2020 and I rode about 3000 km a;ready and feels good. I will check them after 12000 km when I will replace them, hope all is well. View Detail
Fits: HONDA CB1100 10-21, HONDA CB1100 ABS 10-21, HONDA CB1100RS 17-21
The best from NGK, i changed mine ( 4 pcs ) on 20000km and as honda genuine its the same as this one and same part numberI will change the next one again on 40000km !Thank you webike japan it took only one week from order to receive in Saudi Arabia.View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。