维修用 普力盘
商品 # 7001-7
商品 # 7001-7
适配车型链接
Fits: SUZUKI Address V100 All years, SUZUKI Address V100 All years
This is an Address V100 Initial Model that I got from Zimoti, and they said they had already replaced the Weight Roller, Belt, etc. It was NCNR, so I got it and drove it home on level ground, and at the time I thought the acceleration was strange. However, when I found the seller's bid record on Jimoti, I found out that the previous owner had just bought it a month ago, and he had sold it to me as a refurbished motorcycle that he had gotten at a bargain price. The scenario was that my previous owner also bought it with the same offer, but he thought it was no good, so he sold it with 5,000 yen extra, and I bought it without checking.
The symptom is that on a normal flat road, the car is scuzzy at the bottom and can accelerate rapidly to about 70km/h, but the acceleration is strange. However, when going up a certain hill, it drops to about 15km/h.
So I bought this Kit, prepped it on Youtube, and went ahead with the replacement. The previous owner had Belts, the WeightRoller replacement was a total lie, the WeightRoller was unevenly worn, the 1pc. was stuck in the wrong direction, the triangular part (I don't know the name) was not attached to the 1pc. and the Pulley was full of rust, the Belts were worn out. The belt was worn out.
This seemed to be NORMALWeight, but I thought I would focus on acceleration a little more because I am metabolic, but I used this as is to see how it goes with NORMAL for now. It's back to normal as if it was a lie. Thanks to this, now I can go up hills comfortably, and I use it for commuting and shopping.
As for the ease of installation, I myself had an Impact Driver and an electric Impact wrench, so it was extremely easy to install (thanks to the prep work on Youtube). I myself am a star Quantity:I am satisfied with the ease of installation of 5pcs.
However, if you don't have an electric impact wrench or something like that, you'll need to get some special tools, so I'd give it about 4 stars. However, if you replace it once, you can do it by yourself next time, and you may be able to get your money's worth. After all, the worn WeightRoller and Belt are consumables, so webike lovers should replace them.View Detail
Fits: SUZUKI Address V100 All years, SUZUKI Address V100 All years
I used it to repair my ADDRESS V100 that I bought from Jimoti. I didn't complain about it because it is NCNR, but after I bought it, it runs on the flat ground, but when it goes up the hill, the gear shifting is strange. I did not complain because it is NCNR. When I checked carefully, I found that the previous Owner was sold to me one month after I bought it. I also found an article that the previous owner was selling the bike at a suspicious motorcycle shop, claiming that the bike was in great condition with Belt, Pulley, Weight Roller, Gear oil and Plug replaced. I found out that the former owner took it seriously and bought it. But when he got it, he sold it to me because it was strange. Well, I'm an idiot for taking it seriously, but ... .
I bought this parts from Webike to replace Pulley, Weight Roller and Belt. Belts were bought from Amazon Point. It was my first experience to replace them, so I did some research on Youtube and ImageTraining. The actual time was about 2 hours including cleaning.
When I disassembled the scooter, I was surprised to find that the motorcycle shop that sold many scooters in the dubious Jimoty in front of me (I don't have my own shop, I guess) had already replaced the scooter and it was in great shape, but it was a large lie. In addition, one of the triangular parts is missing, and the other side of the Pulley is full of rust. The other side of the pulley is covered with rust. It was not replaced a month or two ago, and one of the pulleys is turned sideways and does not roll. It's a terrible thing to buy, and I'm surprised that it was running well. Of course, the belt was not new either. I thought it was a lie to say that I had changed the gear oil, so I changed this too.
The weight is standard, so it is normal driving, but it can go up the hard slope very fast. Finally, the driving is back to normal. I myself bought a new ADDRESS V100 20 years ago (later it was broken and scrapped).
It is good for a beginner like me to have a set of Weight Roller, Pulley and so on. It was rather time consuming to clean the bike, but it was a great feeling to get it running again. I'm glad to have the experience that I want to replace Belt and Weight Roller on my other moped.
This is a photo of an old bad Pulley, WeightRoller. This is not good enough! It was my experience that it is better to get a used Scooter such as Gimoti on the premise of replacement.
I didn't take any pictures of the replacement because I wanted to finish it before it rained. The pictures here are the old parts that were originally attached. Let's replace it before it gets to this point.View Detail
Fits: SUZUKI Address V100 All years, SUZUKI Address V100 All years
I couldn't get to the Ramp Plate because of the misalignment of the center of the spline hole.
It was obviously adulterated with a manufacturing defect that was distributed to the customer.
I'll contact the company you purchased it from immediately and attach a photo of the situation.
I applied for a replacement for the defective product, but I only received an email from the system's receptionist and no contact from the person in charge.
After 5 days, I finally got a call from the rep, only asking me to send them the car's name, model and VIN.
This product is sold clearly stating that it is compatible with all models.
Why do we need the type of
If you are forced to send the requested information
And then two days later, he asked me to send him a picture that shows the problem.
The answer came back to me. I was so appalled that I couldn't say anything.
It's disgusting.
I've filed a bad application with a proper photo first.
Are you looking at nothing and responding to Objection?
What have you been doing all this time to send me pictures now?
A totally insincere answer.
I'm sending you the pictures first, so you can see them.
When we contacted them, we made a mistake and they hadn't seen the photos.
I'll send it to the manufacturer now and see what they can do.
He said he was sorry.
At this point, it has been ten days.
Finally, 12 days after filing the Objection yesterday, we finally got the
I'm trying to get to the Gold level.
And the comments at the time.
It looks like the Hole Center is out of alignment in the photo.
It's just that the parts are shifted around in the picture.
It's possible that this is not a defective part due to a hole center shift
But just in case you're wondering, I'll return the gold.
Well, what a bad product you're distributing and you don't want to admit it.
Even more supercilious comments without sincerity!
I'm causing a lot of trouble for my customers!
I strongly vowed to never buy things from here again!View Detail
Fits: SUZUKI Address V100 All years, SUZUKI Address V100 All years
As Belt's wear was terrible, Pulley also refreshed at the exchanging. Though there was also in everyone's review, three Screws fixing the detachment of Plate were hard and hard.. When the Plate comes into contact with the Plate cover, it will catch on Cover and will not return to normal position. We corresponded at Plate cover before replacement. As a running performance, I am satisfied that the acceleration feeling is strong.View Detail
Fits: SUZUKI Address V100 All years, SUZUKI Address V100 All years
Of three screens Quantity : 2pc can be off normally, no matter what you do 1 Gap does not happen. Even if you hit with the Penetrating Driver, even if you use Slotted screwdriver, you can not slip even if you apply the anti-slip liquid to the screw head or apply the cooling Spray and push the Impact Driver and rotate it. It does not make sense if performance is good or not usable. For Manufacturer, I think that you can do the least product management before returning it to Package. (The inquiry staff's argument is "The damage of Screw Mountain is caused by customer's work. ~ In this case, the fact that it is being tightened with high Torque, checked the state indicated, and as a result of the customer's work at the judgment of the customer himself, as a result of licking Screw Mountain, various tools It means that the result was damaged as a result of being unable to go out even by using it. It is said that. I'm fooling around.View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。