强化铝合金后齿盘
商品 # D34-03-044
商品 # D34-03-044
※车型适用资讯以该车辆原厂配置为准,若改装齿盘、摇臂等请自行评估需要的目数、规格。
※安装需要专用工具。
商品使用钢制成,并进行了特殊热处理,因此它具有铝无法比拟的耐用性。
外观采用高精度的雷射切割,大幅度减重的同时也展现了出色的耐用度。
与原厂齿盘相比下还减少了约30%的重量!
Fits: HONDA CRM250R 89-96, HONDA XR600R 91-20, HONDA CRF250RALLY 17-20, HONDA CRF250M 12-20, HONDA CRF250L 12-20
这个牙盘是和前齿盘一起买的,前面14T后面40T,搭配的有ZETA的链条导板,目的有一下:1.视觉上更为好看(我的车是2018款CRF250RALLY 银灰配色)2.轻量化3.强化传动我很满意This disc is bought together with the front disc, 14T front and 40T rear, with the ZETA chain guide, the purpose of the following.1. visually more beautiful (my car is 2018 CRF250RALLY silver gray color scheme)2. Lightweight3. strengthen the transmissionI am very satisfiedView Detail
Fits: HONDA CRM250R 89-96, HONDA XR600R 91-20, HONDA CRF250RALLY 17-20, HONDA CRF250M 12-20, HONDA CRF250L 12-20
First time buying DRC Dura sprockets . Ordered to replace a sunstar 42T.Colour black. Quality is fantastic. Fitment is perfect. Installation work is easy. Highly recommended itemView Detail
Fits: HONDA CRM250R 89-96, HONDA XR600R 91-20, HONDA CRF250RALLY 17-20, HONDA CRF250M 12-20, HONDA CRF250L 12-20
I think the rear sprocket is more frequently replaced, but I have to admit that this product wasn't reduced enough to replace it.
It was still Dura Sprocket before I bought it back, I don't know how many Seasons I used in Race...
FrontSprocket and Chain were exchanged in conjunction with the exchange.
Anyway, the cost performance is good. If you're looking for lightweight, Material:Aluminum is good, but this product is made of steel and has a good durability. However, this product is made of steel and its durability is very good.View Detail
Fits: HONDA CRM250R 89-96, HONDA XR600R 91-20, HONDA CRF250RALLY 17-20, HONDA CRF250M 12-20, HONDA CRF250L 12-20
I reduced the number of teeth from 40 to 39 OEMs and raised the GEAR ratio slightly.
The front side is OEM Product so it will be the same as CRF 250M.
If CRF 250 L is used, it is most likely to change the GEAR ratio to a lower level.
And I was half confident on my own but 1. I changed Tire from On road.
2. The next Touring destination is Hokkaido. So I have decided to decide when to select items.
When installing, I feel tightening Screw, the tightly feeling after tightening is higher quality than OEM Product
I can feel. The lightness of the product itself is also good.
The impression that I felt as if it got a bit calmer.
Clearly the choice of GEAR obviously became less than 5 speeds, whether the number of gear shifts decreased or fatigue after running
I feel I have decreased.. It is surprising effect.
Because this product is high quality for price, I think that everyone can satisfy it.
Good shopping was done..View Detail
Fits: HONDA CRM250R 89-96, HONDA XR600R 91-20, HONDA CRF250RALLY 17-20, HONDA CRF250M 12-20, HONDA CRF250L 12-20
Since it was over 20000 km, I changed Rear's Sprocket to DRC in conjunction with Chain exchange. Replace the Front with a new one as OEM. For me, I think that the appearance has changed considerably (* '∀ `) How is that?
Since things were organized by Dealer, there was not any difficulty.
As a change point, I increased it from OEM 40 to 42. Commuting Spec. Yet, 60 km / The speed band around h is painful (No Д`) ... Impression after change, - - - Quite nice! Although it's just increased 2, it's easy to get on dramatically. 60km / It is very easy to shed around h. Well, commuting is easier. Ah, it is personal impression to the last.
After that the speed error is computed to be -5%, so there will be no problem. maybe - - - f(^_^;
Finally this is the failure point, but OEMChain is 106L - - As you can see, Limit is. Dealer says, DIDChain with little growth, why did you want 3 LINK f (^ _ ^;.
Anyway, I got it properly attached. Looseness is also a proper value. It was good (* '∀ `)View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。