.垫片和垫片组被高性能机器中的专业人士使用,并作为全球范围内的OE替代品
.材料可能会有所不同,这取决于。每一个零件编号都包含了一个应用场合的适当数量的垫片
.在美国制造。S.
头和底座垫片
各售出
.高质量的材料为最大的性能公差和使用寿命而开发;可供选择。有多种厚度和材料
外层是压花的,两面都涂有氟利昂,以满足各种苛刻的密封要求。环境、负载条件和表面处理
中心或垫片层是未涂层的不锈钢,可根据不同的环境、负载条件和表面处理而改变。多重厚度要求
mls(多层钢)封头垫片通过使用以下材料,使整个垫片密封面的扭矩负荷均匀。不仅仅是上端,还需要下端和上端的垫片包,才能正确的密封上端
。凸轮链张紧器和气门密封垫圈
美国制造
下端套件
包含所有需要的垫圈和密封件
美国制造。
定子和离合器盖垫片
.不需要垫片密封剂或硅酮圈,也不需要重新扭矩
.afm是一种新型的密封剂。复合丁腈合成橡胶与铝芯粘合,耐高温250°f以上;它的回收率为85%,而它的耐高温性为100%。这是唯一能完成任务的方法。
.出售每一个
.在美国制造
.由AFM或厚纤维材料制成,取决于应用
排气垫片
.
在美国制造
排气垫片是为极端温度而制造的
根据应用情况,作为一套出售
换档轴和反轴链轮密封套件
高质量的密封圈可以正确密封常见的泄漏
.建议更换反轴。当维修/更换反轴链轮时,链轮密封圈
.由优质材料制成,以最大限度地提高性能公差和质量。
......
......
......
.......
......
......
.......
.......
......
......
......
....
・Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
・Materials may vary depending on what is correct and engineered for the specified application
・Each PART # contains the proper amount of gaskets for one application
・Made in U.S.A.
HEAD AND BASE GASKETS
・Sold each
・Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
・Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes finishes
・Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
・MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power. providing less bore distortion and better piston ring seal for more power
・Made in U.S.A.
TOP END GASKET KITS
・Contains all gaskets needed to properly seal the top end
・Enough for one application
・Includes correct head, base, exhaust, cam chain tensioner and valve seal gaskets
・Made in U.S.A.
LOWER END KITS
・Contains all gaskets and seals needed
・Made in U.S.A.
STATOR AND CLUTCH COVER GASKETS
・No gasket sealants or silicon bead is required, re-torque is also not required
・AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250°F; It has an 85% recovery while maintaining a strong torque retention
・Made from AFM material for longevity
・Made in U.S.A.
・Sold each
VALVE COVER GASKETS
・Sold each
・Made in U.S.A.
・Made from AFM or thick fiber material depending on application
EXHAUST GASKETS
・Made in U.S.A.
・Exhaust gaskets are made for extreme temperatures
・Sold as a set per application
SHIFT SHAFT AND COUNTERSHAFT SPROCKET SEAL KITS
・High-quality seals allow for proper sealing of common leaks
・Recommended to replace the countershaft sprocket seal when servicing / replacing the countershaft sprocket
・Made of quality materials developed for maximum performance tolerances and longevity
・Made in U.S.A.
・Sold each