颜色可以将SEA BASSGSX 750 KATANA·1100 SKATANA的摇臂连接到CB 750 F / 900 F.
数量:对 (左和右) 对于不对称CB-FSwing臂KATANASwing Arm是数量:对 (左和右) 这是一个对象。
为了解决这个问题,数量:配对 (左和右) 更改已安装的KATANASwing Arm Offset的颜色宽度。
车轮中心和链条线都处于合适的位置,因此可以在OEMWheel和CB-F制动器周围安装螺栓。
考虑到强度,材料采用钢材。
另外,为了抑制锈蚀,表面是电镀工艺。
当换成KATANASWing Arm,Wheel,Wheel Collar,Caliper支架时,可以使用CB 750 F / CB 900 F安装扭矩杆。
枢轴可用于CB-F,轴轴可用于CB-F,KATANA。
另外,请使用Cap,Pivot内部颜色和链条调整器,用于摇摆臂的Pivot部分中的KATANA。
包括操作说明书。
[关于摆臂的悬架接收部分的衬套宽度]
接收悬架的布什可以用OEMBush换成CB-F,或者如果你用布什换KATANA,请把它切成19mm宽. (*见图4)
* CB-F的OEMBush产品编号为40548-268-000 [适用于CB 750 FZ] 和52451-357-000 [适用于CB 750 FA - FC] 有两种类型,都可以使用。
(衬套外周宽度为CB 750 FZ(18mm) ,对于CB750FA-FC (16mm) BushCenter部分的宽度 (19mm) 在直径 (10mm) ·OD (22mm) 因为两个布什都有相同的尺寸)
This collar enables to install the swingarm for Suzuki GSX750S Katana 1100S Katana on CB750F/900F.
KATANA swingarm is designed to be used with the asymmetrical CB-F swingarm.
To solve this problem, the width of the left and right collar is changed to offset the Katana swingarm.
Both the wheel center and chain line are correctly positioned to allow bolt-on installation to the stock CB-F wheels and brakes.
The material is steel for strength.
The surface is plated to prevent rusting.
If you change to Katana swingarm, wheel, wheel collar, caliper support and torque rod of CB750F / CB900F can be used.
Pivot shaft is for CB-F and axle shaft is for both CB-F and Katana.
The cap of the swingarm pivot, the collar inside the pivot and the chain adjuster must be used for Katana.
Comes with an instruction manual.
[About the bushing width of the swingarm suspension support part]
The bushing of the suspension support should be replaced with the stock bushing for CB-F. Or, if you use the bushing for Katana, cut it down to 19mm width.(*See image 4)
*The stock bushing part number for CB-F is 40548-268-000 [for CB750FZ] and 52451-357-000 [for CB750FA-FC], both of them can be used.
(The width of the outer circumference of the bush is for CB750FZ (18mm) and for CB750FA-FC (16mm), but the width (19mm), inner diameter (10mm) and outer diameter (22mm) of the center of the bush are the same for both bushes)