材质:铝合金压铸制
机油滤芯内含
机油冷却器:5排冷却器
冷却器内机油容量:150cc(5排冷却器)/75cc(3排冷却器)
螺丝固定式可以安装
附车种専用支架
*油路是用超离合盖取出来的。<我们建议使用大容量的机油泵(超级机油泵套件:331-1413000),因为它安装了机油冷却器。
※如果同时安装了油箱或离合器等附件,则可能需要更换或修改支架。
※请按照安装说明书的要求进行安装。如果联合乳头一侧朝下,油压会降低,导致缸盖润滑不足。<右侧正常的曲轴箱盖需要进行钻孔和攻丝工艺。
※图片的颜色是银色的。
Material: Made of die-cast aluminum
Built-in oil element
Oil cooler: 5-stage core capacitor
Oil capacity in condenser: 150cc (5-stage core) / 75cc (3-stage core)
Bolt-on installation is available
Bracket for exclusive use of model included
*The oil line is taken out by the ULTRA clutch cover.
*Since an oil cooler will be installed, a high-capacity oil pump (Super Oil Pump Kit: 331-1413000) is recommended.
*The installation bracket may need to be changed or modified if the tank, clutch or other accessory parts are installed at the same time.
*Make sure to install the condenser according to the installation instructions.If the union nipple side is installed face down, the oil pressure will drop and the cylinder head will not be lubricated enough.
*The right side stock crankcase cover requires a tapped hole.
*Installation image is color: Silver.