【型式】圆形大灯
【尺寸】
・外形尺寸:W200mm×H200mm×D140mm
・螺丝孔:M8×10 P1.00
・安装宽度:200mm
【重量】1300g
【规格】
・180ΦNAKED用
・额定电压:DC12V
・额定电流:3A
・消耗电力:Hi Beam30W/低 Beam30W
・LED:CREE制 XLamp XP-L LEDs 70-CRI 白色
・色温:6000K(No.63150-60)/5000K(No.63150-50)/3000K(No.63150-30)
・最大亮度:40000Candela
※车检适合基准値15000Candela
・LED光圈:光度300Candela以下(其他灯的标准值之后)
・发光部分制造商型式:FLH-880
警告】
※根据说明书正确安装设备。不正确的安装将导致火灾。它可能会导致故障。
※安装前请务必将电池负极的端子线拆下,并确认钥匙已关闭。
※本产品为精密仪器,操作时应十分小心。不要摔倒或强行拉线。操作不当可能会造成故障、受伤或烧伤,并可能导致危及生命的事故。此外,要小心,因为火花和有缺陷的绝缘材料会引起故障和车辆火灾。<本产品的拆解。不要对数据进行任何修改。分解:我们对改装后的产品不提供任何保证。
※当LED灯亮起时,请勿直视。它可能会导致视觉障碍。<在关灯期间和关灯后,请勿将水溅到镜头上。温度的突然变化可能会对镜头造成损害。当 "指示灯 "亮起时,请勿触摸主机,因为它会变热。
【注意】
*本产品设计用于`12v直流(dc)负公共模式。接线时一定要用dc12v电源。<切勿将本产品安装在小排量车常见的AC(交流)照明系统的车辆上。
大灯的负侧接线对于喜光灯和厌光灯都是一样的。加普通大灯系统与本产品不兼容。
※本产品仅供摩托车使用。它不能用于四轮车。<请勿用纸或布覆盖,也不要在易燃物附近点燃。它可能会引起火灾或异常加热。请勿在易燃物附近点燃,如易燃喷漆稀释剂或其他可能点燃的易燃物。<请勿在灯火通明的情况下安装设备。否则可能导致故障或烧毁。
※本产品为日常使用的防水产品,但并非完全防水。由于每个配线耦合器都不是防水的,所以要用乙烯胶带或自熔胶带把耦合器包起来,或者用填缝剂防水。不要用超过必要的水润湿它。
※用高压清洗机洗车时,不要让高压清洗直接撞击产品。
※由于产品的特性,会产生热量。安装时一定要注意,开车时风对着它吹。即使在安装本产品后,也要定期重新紧固产品,以确保其安装牢固。<请勿堵塞大灯箱后部的排气散热孔。确保有足够的空间让空气流动。
※如果机体受热,长时间放置,镀层上粘有水分,镀层可能会脱落。使用前一定要擦掉附着的水分。<请勿跌落、划伤或过度用力。不仅会造成损坏`性能下降`缩短寿命,而且会造成伤害。<请不要在纸或布、汽油、易燃喷雾、油漆稀释剂等易燃物附近点燃。
※使用前对准光轴。它可能会阻碍对向车辆的视线,造成交通事故。
※安装需要专业的知识和技能。请到指定的维修机构,由熟练的技师进行维修。如果是不合格的业余人员安装,在任何情况下都不适用保修。
*因使用本产品而引起的故障。因意外事故造成的损失,我们不承担任何责任。此外,本公司不负责本产品的安装、拆卸等维修费用。先谢谢你的理解。
【安装注意事项】
※机组的安装必须在指定的维修机构进行,并有熟练的技工在场。
※安装后对准光轴。
※详情请参考道路车辆安全标准。
[Type] Round eyes
[Size]
・External dimensions: W200mm x H200mm x D140mm
・Screw holes: M8 x 10 P1.00
・Installation width: 200mm
[Weight] 1300g
[Specification]
・180Φ for naked
・Rated voltage: DC12V
・Rated current: 3A
・Power consumption: Hi beam 30W / Lo beam 30W
・LED: CREE XLamp XP-L LEDs 70-CRI White
・Color temperature: 6000K(No.63150-60)/5000K(No.63150-50)/3000K(No.63150-30)
・Maximum light intensity: 40000 candela
・LED O-ring: Luminous intensity of 300 candela or less (meets the standard value for other lights)
・Manufacturer's model of the light emitting part: FLH-880
[warning]
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF.
*Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens.Also, please do not touch the main unit while the LED is lit because it becomes hot.
[Notes]
*This product is only for 12v DC minus common.Be sure to use DC12V as the power source for wiring.
*Please do not connect to the AC headlight, which is common in small displacement vehicles.
*Minus common refers to the type in which the negative side of the headlight wiring is common to both the Hi beam side and Lo beam side.Not compatible with vehicles with positive common headlights.
*This product is for motorcycles only.This product is not for use on automobiles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install the unit when the light is on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.The couplers of each wiring are not waterproof, so please use vinyl tape, self-bonding tape, or caulking agent to waterproof them.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*These products generate heat due to their characteristics.When installing, be sure to install it so that it is exposed to the wind when riding.Also, after installing this product, periodically retighten it to make sure that it is securely installed.
*Do not block the heat exhaust hole at the rear of the headlight case.Make sure that there is enough space for the sucked air to flow.
*The plating may peel off if it is left for a long time with moisture on the plated part while the body is hot.Be sure to wipe off any moisture that may have adhered to the product before use.
*Please do not drop, scratch, or apply excessive force to the LED light body.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*Do not light near flammable or inflammable materials such as paper, cloth, gasoline, flammable spray, thinner, etc.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.In case of installation by an unqualified amateur, the warranty may be voided under any circumstances.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
[Precautions for installation]
*Installation should be done at a designated maintenance shop with a skilled mechanic.
*Always adjust the optical axis after installation.