●塔姆特处理工艺(特氟龙/硬质阳极氧化/钼处理工艺)
硬质阳极氧化铝+二硫化钼+特氟龙(表面)
当接触面压力较大或较细时,仅有硬质阳极氧化铝涂层是不够的。如果在有震动或摩擦的地方使用,可能会引起发作。
我们成功地在这种硬质阳极氧化铝上增加了自润滑功能,以提高链轮的耐磨性。
润滑性。耐磨性
二硫化钼,通过电解沉淀浸透阳极氧化铝的所有微孔,可显著降低硬涂层的摩擦阻力。
用于无润滑的滑动部件的润滑。
耐用性
在耐摩擦测试中,耐用性超过标准硬阳极氧化铝数倍。
●与标准阳极氧化铝相比,硬度更高
130%至150%。
●THAMT treatment (Teflon / Hard anodized / Molybdenum treatment process)
Hard hard anodized + molybdenum disulfide + Teflon (surface)
A hard anodized aluminum coating alone may cause seizure if used in areas where contact surface pressure, fine vibration, or friction occurs.
This hard anodized aluminum has a self-lubricating function and has succeeded in improving the wear resistance of sprockets.
●Lubricity and wear resistance
Molybdenum disulfide soaked into the entire micropores of anodized aluminum by electrolytic dissolution greatly reduces the frictional resistance of the hard film.
Lubricating properties for use in sliding parts without lubrication.
●Durability
Durability is several times higher than that of standard hard anodized aluminum in friction tests.
●High hardness
About 130%-150% improvement compared with standard anodized aluminum.