【规格】
・额定电压:DC12V
・外径尺寸:W25.5mm×H30.5mm×D15.5mm(※突起部除外)
【套件内容】
・SPI-110 C1本体 ×1
・车种専用线束 ×1
・各种双面胶
・使用说明书・保证书
※附件因套件不同而异。
*开车时请把安全放在第一位,前面不要大意。
*在公共道路上使用时,请遵守交通法规行驶。
*请勿使用无电阻火花塞。如果使用没有电阻的火花塞,可能会产生噪音,无法正确输入旋转信号,所以要使用带电阻的火花塞。
*将所附的双面胶贴在相机的背面,以防止水进入相机。
*安装时要根据说明书正确安装。不正确的安装将导致火灾。它可能会导致故障。
※安装本产品后,请定期检查是否有零件脱落。
*因使用本产品引起的故障。因意外事故造成的损失,我们不承担任何责任。先谢谢你的理解。
*我公司不负责本产品的安装和拆卸费用以及其他任何维修费用。先谢谢你的理解。
*经普泰克公司检查兼容性的车都是正常车。如果车辆配备了非原厂的售后零件,可能会造成问题。
*安装时一定要检查摩托车维修手册中的相关线路。
[Successor part number] 11392
[Specification]
・Rated voltage: DC12V
・Outer diameter dimension: W25.5mm x H30.5mm x D15.5mm (*excluding protruding parts)
[Components]
・SPI-110 C1 main unit x 1
・Model Specific Harness x 1
・Various double-sided tapes
・Instruction manual
*Components vary by kit.
*Prioritize safety while driving and do not be careless in front.
*Please do not use non-resistive spark plugs.If you use a plug without resistance, noise may be generated and the rotation signal may not be input correctly, so please use a spark plug with resistance.
*Please put the attached double-sided tape on the back side of this product to prevent water from entering because there is a switch.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*After installing this product, periodically inspect it to see if any parts have fallen off.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*All vehicles that have been tested by Protec are stock.There is a possibility that a problem may occur if the vehicle is equipped with aftermarket parts other than stock parts.
*Please refer to the service manual of your motorcycle to confirm the respective wiring before installation.