黑色防水摩托车罩 Light 后行李箱安装车用 L
商品 # 97948
海淘直邮价(不含运费&税费)
406.79 RMB (8,518 日元)
定价 668.59 RMB 节省 39%
+85 Webike点数 (4.05 RMB)
商品 # 97948
海淘直邮价(不含运费&税费)
406.79 RMB (8,518 日元)
定价 668.59 RMB 节省 39%
+85 Webike点数 (4.05 RMB)
颜色:黑色
耐水压:20000mm
附专用收纳袋
尺寸:L
【基本尺寸】
总长:220cm
总高度:140cm
总宽度:100cm
座椅高度:100cm
后端上部宽度:25cm
后端底部宽度:58cm
【基本BOX Size】
深:42cm
宽:55cm
高:33cm
※尺寸请于商品图片处之尺寸表确认。
※车罩表面虽经过防水处理,但并非完全防水,雨量过大时仍有渗水可能性。
※使用车罩前请先确认车辆已充分冷却。
※车罩经过长期日晒雨淋,必定会随使用有所劣化。根据不同使用环境,可能出现褪色状况。
※安装部分后箱之车辆可能无法使用。
※使用前请详阅商品上注意事项。
全新的黑色外观版本!
全新开发的防水材质,耐久性与耐水性都大大提升。
耐水压力为 20,000 mm。
不仅如此,还有以下特点:
・散热机能
在左右后照镜上都有特别设置的通风口以散发水气。
・前后设定的辨识度提升
在前方设计红色的色块、黑色色块则是代表后方的固定位置。
因此更能轻松辨识商品的固定位置!
・后方的收紧设计
后方收紧设计,可以防止商品拖到地上;增加移动时的危险。
・高温耐热垫设计加入
新增了高温耐热垫的设计于排气管等高温零件上,可以防止商品熔化。
・中心的防风固定带
用以减少侧面的受风面积,以减少爱车因停车时的侧风而倒车。
・大型防盗锁对应
于前方与后方都设有固定孔,可以提供大型防盗锁进行使用。
适配车型链接
Fits: KAWASAKI BALIUS2 , SUZUKI BURGMAN200 19-21 UH-200L9 CH41A, KAWASAKI BALIUS , KAWASAKI ESTRELLA , KAWASAKI NINJA2 Helmet50RR
I had ordered from your company before and was satisfied with the quality.
I ordered again. The quality is very good and I recommend it to everyone!
Motorcycle is on a pcx and has a box in the back so
It is useful for a small number of items to be supportedView Detail
Fits: KAWASAKI BALIUS2 , SUZUKI BURGMAN200 19-21 UH-200L9 CH41A, KAWASAKI BALIUS , KAWASAKI ESTRELLA , KAWASAKI NINJA2 Helmet50RR
I bought this one because I don't have a Spec. Cover with a box and a Long Screen, and because I have a Long Screen, the Front is a little short and the Caliper is high enough to be visible, but I can't help it.
If there is a Cover of Long ScreenSpec. with Box, I would like it.
I'm not sure how durable it will be, but I'm sure it will be fine.View Detail
Fits: KAWASAKI BALIUS2 , SUZUKI BURGMAN200 19-21 UH-200L9 CH41A, KAWASAKI BALIUS , KAWASAKI ESTRELLA , KAWASAKI NINJA2 Helmet50RR
This is a view of the GSX-R125+Rear Carrier+TANAXMini Field Seat Bag with the Top case installed for Vehicle L.
It's perfect with a bit of room for both front and back length and height, just for full size moped + carrier reference.View Detail
Fits: KAWASAKI BALIUS2 , SUZUKI BURGMAN200 19-21 UH-200L9 CH41A, KAWASAKI BALIUS , KAWASAKI ESTRELLA , KAWASAKI NINJA2 Helmet50RR
I've been using the old one before this type, but this time I started using it to replace it
First of all, Material is lightly unlined and a bit thick? It's now a thing of the past, and at first I wonder if it's not a good adherence because of the Wrinkle in the folded packaging But after a week of use, I was able to get used to it for Large
In addition, the exhaust system and the fire-resistant exhaust pipe preventive cloth seat from burning is included in the package, which is aligned and attached to the inside of the Cover It needs a little hang to stick on without Wrinkle, and also Exhaust at high temperature I think there is a Case that the pipe touches, so I try to use it after it has cooled down
Formerly MODEL is the surface BlackCoating of the surface came off a little bit, but The material change seems to have made it difficult to peel off, and the stiffness of the surface has changed
You might also expect the seam lining side Seal tape to be close together as well
Size was perfectly Exactly and there was no problem, it's not easy to Exactly things I'm going to try to use it for Large cut carefully, based on my previous experience, because there is no, well, which I'm looking forward to seeing how much more durable it is
In addition, because the Material is like Vinyl, it seems to generate static electricity in winter, a little uncomfortable You need to take measures in the future because there is a sense ofView Detail
Fits: KAWASAKI BALIUS2 , SUZUKI BURGMAN200 19-21 UH-200L9 CH41A, KAWASAKI BALIUS , KAWASAKI ESTRELLA , KAWASAKI NINJA2 Helmet50RR
semi-indoor (Depending on the direction of the wind, it may get wet.) I used it for about 10 years on my XG250 TRICKER with the box installation
I would like to say that there is no problem of durability if it can be used that much, but the outside of the BlackCoating peels off after use
Also, the inner seam tape has come off
Further Floppy-proof Belt resin lock is broken and cord-fixing up the hem of the Cover The resin lock of the
There are conditions such as Repair, Giving up, and halfway house, respectively, which made it possible to use it for a long time It is
There are some other products that can be used as seat covers with the ear box installed I'm sure I'll have to repurchase it soon as I don't have any, it's not too much trouble to hang it up and it's an easy type to hang up I think it's not
Be careful not to rub the inner seam tape when you hang the cover If you use it in a few places, etc. and use it carefully, it will be durable for several years
In addition, if the exhaust pipe and engine are not cooled down, the exhaust pipe and engine will be cooled down The engine and exhaust system must also be kept in mind for sticking to the engine and exhaust system
Small size and self-storage made it possible for me to carry it with me on short assignments and business trips
This is the first time I've used the black Seat cover, but in the dark at night It is not noticeable at all as the Manufacturer comments
View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。