短牌照架
商品 # AE-74021
商品 # AE-74021
【材质】
车身、车牌底座:CNC铝合金
方向灯支架、挂钩、牌照灯支架:不锈钢黑色阳极处理
铝制车牌架:黑色阳极处理铝合金
角度:40/45度
【配件】
铝制牌照架
薄型反光条(双面胶带粘贴型)
※安装时左右两侧的间隙可能会有差异,是因为制造商的副车架安装公差所造成的。
※本商品规格可能因为制造商的因素而有所变更。
※于道路使用前,请先确认改装后的规格是否符合当地的监理法规。
●带有 V4 尾翼的严谨设计。
●高级车辆的CNC零件。
●两种角度(40度和45度)可供您做选择。
●闪光灯和牌照灯是原厂商品。
适配车型链接
Fits: DUCATI PANIGALE V4 , DUCATI PANIGALE V4 S , DUCATI PanigaleV2 , DUCATI StreetFighterV4
[How is it used?
Purchased at the same time right after purchasing the vehicle.
I did not install it at Dealer, I did it myself.
Was the one you received as per Image?
At first I only saw the picture, and I liked the Cut-out feeling of Aluminum, so I bought it, but
The texture was wonderful, just like the picture.
The only thing is that the packaging was somewhat unreliable and the parts were moving around in the box ×.
(It's aluminum, so if you bump it, it will be scraped off, so please pack it so that it doesn't move.)
Was the installation difficult?
I installed it on my Panigale V4SP, although it was not a compatible model.
The Panigale itself is a vehicle that is intended to be used in Race, so the OEM Fender is a BoltQuantity:I just stopped at 2pc.
The structure is very easy to remove.
As for the point that I had trouble when I actually installed it, the connector of Blinker and License Plate Light is big, so it is quite large and strange to push it in at the time of installation. Because there is almost no space which can store an extra wiring and a connector in this product side, it is pushed into the body side, but because there is not much room in the body side, the skill of the wiring is questioned.
However, I had no trouble assembling this product itself with the Instruction Manual being very thorough.
It is installed properly on the Panigale V4SP.
So I think the only thing I struggle with is storing the Connector and Wiring.
How was your experience with it?
I'm using a Blinker with an Active License Plate Holder, so it's not a pure installation, but the Panigale Rear that was so big has been cleaned up.
There is no cheapness, and the Cut-out feeling of Aluminum is well understood from the side, and it produces a high-class feeling.
[Included Parts:were they on?
Yes.
Everything I needed for installation was included.
[Was there anything that disappointed you?
It will not fit perfectly on the removed part, but it will float slightly.
Personally I'm not too bothered by it, but I don't like the idea of rolled up sand or Dust getting in there either.
I would like to fill it with Sponge or Rubber sheet.
[It might be a good idea to buy them together].
If you think OEM Blinker is not good enough, I recommend you to buy Active's Blinker with License Plate Holder.
It doesn't assert itself too much, and it refreshing around the rear.View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。