Grundmann vbj在日本设计和制造,是一种高性能的V型带,由可靠耐用的芯材和高质量的橡胶制成。
柯达瓦里的品质保证了V带的使用寿命。
传动V带是踏板车传动系统的命脉,是专门为车辆设计的,可以放心使用。
传动皮带是消耗品!
传动皮带是消耗品。
司机皮带就像摩托车上的链条。
及早检查和更换皮带,可以消除皮带断裂等问题,提高燃油效率。
【案例1.没有速度......。/我听到一个声音... 】
传动皮带磨损
当传动皮带磨损时,加速度降低,传动皮带可能会断裂,使其无法行驶。
皮带的宽度与换挡有很大关系。
当皮带磨损后,宽度变窄,就会失去速度。
【案例2.打开油门踏板后无前行动作......】。
传动皮带断裂
当传动皮带达到使用极限时,传动皮带依次磨损或开裂。
如果像链条断裂,就无法运行,即使启动发动机,摩托车也无法前进。
由于在运行过程中可能会出现故障,所以需要进行维护。
传动皮带在曲轴箱内,无法目视检查。
我们建议随着车辆的使用年限和行驶距离,对车辆进行保养。
传动带的作用
滑板车的传动带将发动机的旋转运动传递给传动装置(轮胎)。<皮带本身是传动的一部分,这就要求精度和质量。
Grondman v.Belt是一个强 。耐用性 .温度:经滑移率等详细的产品数据测试,通过了jaso标准规定的数值,是一款安全可靠的产品。
结构
皮带的结构由六层组成,通过改变芯线的种类和橡胶的材质来决定质量。
传动带必须是柔性的,因为增加其强度会加速其磨损。
皮带的传动传动和磨损
传递动力的传动带往往注重皮带的上宽下窄,但实际上,中心线的位置是设计皮带的关键点,因为中心线是皮带传递动力的重要部分。
当皮带磨损后,驱动传动性能下降,油耗也会受到影响,所以建议尽早保养。
※本产品根据车型不同,可能会与原厂皮带的上宽下窄有所差异,但行驶时不会出现任何问题。
耐用性
传动带的磨损包括开裂、脱落和磨损,需要一定的时间才能达到切割的程度。
它们的水平可以通过目测来判断,但由于它们通常在曲轴箱内,所以根据曲轴箱的里程数和年龄来预测更换周期是合适的。
周边部件(如皮带轮、扭矩凸轮等)的影响可能导致皮带断裂。
建议您在必要时检查皮带轮、托辊和其他周边部件,以便更换皮带。
Designed and manufactured in Japan, the GRONDEMENT VBJ is a high performance V-belt made of reliable and durable core wire material and high quality rubber.
The quality of our V-belts is the key to their long life.
The drive V-belt is the lifeblood of the scooter's drivetrain, and is designed specifically for use with your vehicle.
(Passed Japanese standard JASO standard)
The drive belt is a consumable!!!
The drive belt acts like a chain used on a motorcycle.
Without the belt, the scooter cannot run.
By inspecting and replacing the belt as soon as possible, you can eliminate problems such as belt breakage and improve fuel efficiency.
[Case 1: No speed... / Noise...]
Drive belt is worn out
If the drive belt is worn out, acceleration will decrease and the belt may break, making it impossible to drive.
The width of the belt plays a major role in shifting gears.
As the belt width narrows due to wear, speed will be reduced.
[Case 2. The vehicle does not move forward when the accelerator is opened...]
The drive belt has been broken
When the drive belt reaches the end of its service life, it wears out, cracks, and finally breaks (breaks).
In the sense of transmitting the drive, if the chain breaks, the scooter will not be able to move forward even if the engine is running.
It can break when running and is dangerous, so maintenance is necessary.
The drive belt is located inside the crankcase and cannot be visually inspected.
It is recommended that maintenance be carried out according to the age and distance of the vehicle.
■The Role of Drive Belts
The drive belt for scooters is responsible for transmitting the rotational motion of the engine to the drive (tire).
Since the belt itself is a part of the transmission, precision and quality are required.
Grondemann V-belts are safe and reliable products that have been tested for strength, durability, temperature, slip rate, and other detailed product data, and have passed the JASO standard values.
■Structure
The structure of the belt consists of six layers, and the quality is determined by changing the type of core wire and the material of rubber.
Flexibility is required for drive belts, as increased strength leads to accelerated wear.
■Drive transmission and wear of the belt
However, in reality, the centerline is an important part of the belt that transmits power, so the centerline position is a key point in the design.
Since the width and position of the centerline are also related to the speed ratio, when the belt is worn, the drive transmission performance is reduced and fuel consumption is affected.
*This product may differ from the upper width of the stock belt depending on the model, but there is no problem at all in ridinf.
■Durability
Drive belt wear consists of cracking, peeling, and abrasion, and it takes a certain amount of time for the belt to break.
It can be judged visually, but since it is usually in the crankcase, it is appropriate to predict the replacement period according to the mileage and the elapsed years.
The belt may break due to the influence from the surrounding parts (pulley, torque cam side, etc.).
It is recommended to check the pulleys, weight rollers and other peripheral parts at the time of belt replacement, and replace them if necessary.