'Super Multi-LCD Meter'是一款多功能仪表,无需任何布线工作,只需更换原厂仪表即可安装!
除了原厂仪表的功能外,它还可以显示 "发动机温度"、"空油比 "和 "电池电压"!
此外,它还能显示转速。速度。超级多液晶仪表具有温度峰值保持功能、前轮胎直径补偿、背光变色等多项功能。通过选择功率测试模式,系统还具有测量加速时间的功能(带图形显示),供比赛使用。
【动力测试模式】
动力测试模式是一个全自动的加速度测量功能,当前轮开始转动时,就会自动开始测量。
当达到设定的时间或距离时,系统会自动停止。
可设定时间:5-60秒(以5秒为单位)。
可设定距离:20......30......40......50......60......70......80......90......100......100......200......300......400......500......1000(米)
所记录的距离可在内存中存储9次测量,跑完后可读出并检查。
从跑步开始,以0.1秒为增量的距离,而不仅仅是 "距离 "的最终值和达到该距离的速度。速度。所有的转速都会被记录下来,并且可以在任何位置用图表来检查。它还具有轻松移动到距离超过50、100、200、400、500、1000米的第一个数据的功能。
例如,您可以在400米处测量时间,在100米处显示参考时间。同样,它也有能力移动到`50.100.150公里/小时以外的第一个数据。
(但是,记录是以0.1秒为增量的,所以将是第一个超过 "选择值 "的记录,而不是 "距离或速度")。
记录可以随时擦除,但除非擦除,否则关闭钥匙或从仪表上取下电池,数据是不会被擦除的。
The "Super Multi LCD Meter" is a multi-functional meter that can be installed simply by replacing the stock meter without any wiring modifications!!
In addition to the functions of the stock meter, engine temperature, air-fuel ratio, and battery voltage can also be displayed!!!
The Super Multi-LCD meter is also equipped with a number of other functions, such as a peak hold function for RPM, speed, and temperature, front tire diameter compensation, and backlight color change.By selecting the power test mode separately, it also has a function to measure the section acceleration time (with graph display) as a function for competition.
[About Power Test Mode]
This is a fully automatic acceleration measurement function that automatically starts measurement when the front wheel starts to rotate.
Measurement stops automatically when the set running time or distance is reached.
Configurable time: 5-60 seconds (in 5 second increments).
Configurable distance: 20・30・40・50・60・70・80・90・100・200・300・400・500・1000 (m)
The recordings can be stored for 9 measurements and can be read out and checked after each run.
The distance traveled and the speed at which the distance is reached are recorded in 0.1 second increments from the start of the trip, as well as the final values of the distance traveled and the speed at which the distance is reached, and the values at any given position can be viewed in a graph.Also, there is a function to easily move to the first data after 50, 100, 200, 400, 500, or 1000 meters of riding distance.
For example, the record is measured at 400m and the reference time at 100m can be easily displayed.Similarly, there is a function to move to the first data beyond 50, 100 and 150 km/h.
(Note that the record is in increments of 0.1 second, so it is not the exact distance or speed, but the first record that exceeds the selected value.)
The data can be erased at any time after each measurement, but the data will not be lost even if the key is turned off or the battery is removed from the meter unless the data is erased.