COMP 专用把手
商品 # ZE07-9940
商品 # ZE07-9940
●颜色:黑
●尺寸:宽度:780 mm、高度:123 mm、向上:110 mm、向后:75 mm、冠座固定宽度:185mm
※把手安装部件上没有滚花加工,并且不包括塑胶端盖。
※不能使用原厂的把手端子。请使用ZETA把手端子。
★专为Cross Cub 110设计的铝制把手。 宽弯度具有平滑的形状,强调了越野行驶性能和稳定性。
★把手上左右开关用的安装固定孔已加工,可以直接安装不需要另外钻孔。
★无需进行任何处理即可安装原厂线组。
★对应ZETA Adventure Armor把手护弓,可以直接安装不需要任何修改,而且结构坚固。
适配车型链接
Inexpensive changeable handlebar as the OEMHandlebar was bent due to lighting There is also information that you have to loosen the Accelerator Wire to get in but you can pull out the OEMHandlebar and set the ZETA Handlebar to The Handlebar width is widened and the angle of the arm does not become cramped I think It would be better if there was a little more height for Standing, but the height of the OEM and It's almost the same The quality is high, and of course you can put on the Hand guard and so on without any processing, so you can use OffTaste If you want to take it in, I recommend itView Detail
The width was widened by 2? The Handlebar position becomes like FTR223 It became a ride quality like DirtMotorcycle by the influence of the wide Handlebar The HandlebarMaterial is Aluminum, which is the material of NORMAL Handlebar is heavy with steel? I can't wait to see how it will affect my running
Caution? This handlebar can be attached to a NORMALMotorcycle, but it's not a normal When you turn it on, the throttle wire is not enough If you move it forward from the STD Handlebar position, you can get it, but you can't You need to pay attention to the wires as well On the other hand, it is easy to have a surplus in BrakeWireView Detail
I would have liked to see it a little more narrowed down, but the wide feel is probably good for an Off car
I like the feeling that it doesn't look too different from the OEMView Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。