防水风格,适合一天的强健游戏。"天 "座包是一个一日游的概念。
从高速公路到山路。
从公路到山口,从高原到平原。这款包包采用了独特的机制设计,为您提供所需的功能,让您充分享受一天的旅行。不大不小,也不忘纪念品的容量。装载方便,使用方便,驾驶方便。
【360°防水油布,防泥防雨】。
突如其来的雨水和轮胎溅起的泥水。
【360°防水篷布】
【360°防水篷布】
【360°防水篷布】。
【今天有点远。
【适合一日游,24升容量,不大】。
【适用于一日游】。
【对于今天远一点的地方。这款包包的设计是可以放在后排座椅上面,有足够的空间来放置一日游的行李。24升,骑行时不碍事。此外,还有放置咖啡旅游装备和纪念品的空间。
【标配固定带,"即用即走"】。
包内配有两套专用的固定带,只需与主体上的扣子连接,就可以连接到自行车上。包包通过四个点固定在后排座椅上。
固定带也可单独作为旅游线使用。
当包包连接到自行车上时,您可以访问包包,而无需取出包包。
开口位于侧架的另一侧,所以你不用担心你的行李会飞出去。
侧卷开合
侧卷开合
侧卷开合
侧卷开合
侧卷开合
侧卷开合
侧卷开合。
【核心板块系统】。
【核心板块系统】。
"芯板系统 "是一个独特的创意,在三面围成`pe板框架,减少包的塌陷,增加佩戴者的稳定性。固定用的扣子就在这个 "芯板 "上。扣子就在这块 "芯板 "上,皮带的张力使其紧贴座椅,增加了骑行时的稳定性。
【全部都是功能性的。浮动顶盖"】。】
【所有这些都是功能性的。】
【浮顶盖板是一个独特的设计,它允许你使用盖板本身作为一个压缩部分来固定额外的行李,当你在旅游时需要一个地方塞进你的外套,或者当你想固定你无法容纳在里面的行李或子包。它是一个功能部件,可以让你将行李箱固定在包包和主体之间。
可滴式拉链,保持干燥
。顶部的盖子可以作为防水袋使用。
上盖可作为防水袋使用,防泼水拉链位于盖板后方,防止雨水打湿包包。
使用Doppelganger g-hooks轻松开启和关闭
。
Doppelganger g-hook,方便开合。深邃的爪子提供了安全的钩子。这是减少开合压力的最好方法。
【特点】
■Doppelganger g-hook
原创厚壁g-hook,专为25mm皮带设计。深邃的爪子提供了安全的钩子。皮带调节滑块为弧形,可将皮带牢牢固定。
滚顶结构,开口宽大
袋口为高防水滚顶结构。袋子的开口位于侧支架的另一侧,防止货物掉落。
手把
前后都有手把,用于将包包提升和降低到后座。也可以作为提手使用。
肩带
肩带长130cm。
肩带可以作为携带的抓手。
肩带D型环
D型环的内径为3.8cm。
肩带的D型环内径为3.8cm,可作为固定底座使用。
3.6cm宽的菊花链穿过旅游线,用于固定。菊花链位于包包前后的手柄下方。
用皮带卷带处理多余的皮带
连接在安装皮带末端的皮带卷带可以用来卷起多余的皮带,以减少因风而引起的扇动。
【包的安装方法】
1.将固定带装在车架上,并与包体上的固定扣连接。(左/右)
2.将固定带安装在后挂钩或后托架上,并与包的固定扣连接。(左/右)
3.将包体调整到座椅上最稳定的位置并固定。
【浮动顶盖的连接方式】
顶盖是一个功能部件,通过收紧腰带,可以将行李箱固定在箱包和主体之间。它的盖子后面有一个防泼水的拉链袋。<上盖可以用腰带收紧,以固定包包。
1.将滑块带连接到顶盖上的D型环上。
2.将g钩钩在多带环上,并固定。
【皮带卷带的使用方法】
前、后固定带有捆绑包后多余皮带的功能。
装袋后,皮带卷带可以用来捆绑多余的皮带。
1.将腰带末端的钩扣展开。
2.将钩扣展开后,卷起多余的皮带。
3.将多余的腰带用钩扣捆好。多余的腰带会被固定,防止骑行时拍打。
Waterproof style to play hard all day.Days" seat bag for day trip concept.
From the highway to the pass.From the highlands to the plains.We have pursued the functions necessary for the maximum enjoyment of day touring with our original mechanism. Not too big, not too small, not forgetting the capacity for souvenirs."Easy to load, easy to use, easy to drive" day trip waterproof seat bag.
[Dirt and rain resistant, 360° waterproof tarpaulin.]
Sudden rain or muddy water splashed up by tires.The bag is made of tarpaulin material, which is easy to clean and does not stain the contents.You don't need a rain cover and your luggage is safe even in a sudden rain.
[A little farther today.For day trip touring, not too big capacity 24 liters.]
Touring goods such as rainwear and thermal innerwear unexpectedly bulky.If your bag is too small, you will not be able to handle the various stages of touring.It can hold enough luggage for a day trip and fits on the rear seat.24 liters of unobstructed running.There's plenty of room for coffee touring gear and souvenirs.
[Equipped with a fixing belt as standard, ready to use, ready to run.]
Comes with two sets of special fixing belts that can be attached to the bike simply by connecting to the buckles on the main unit.Securely fasten the bag to the rear seat at four points.The fixing belt can be used as a touring cord by itself.
Luggage in and out while mounted on the bike
The special fixing belt connection allows you to quickly access your luggage without having to remove the bag.The opening is on the opposite side of the sidestand, so you don't have to worry about your luggage flying out.
Side roll opening and closing
Easy to open and close, just wrap the opening and connect the buckles on both ends.Single action, comfortable opening and closing.
[The skeleton that supports the bag, the "core board system".]
The original idea of sealing the PE board skeleton on three sides to reduce the collapse of the luggage and improve the stability of wearing.The fastening buckles are located on the "core board", and the tension of the belt makes it tight to the seat, thus increasing the stability during the ride.
[all of it functional."Floating top flap".]
"The flap itself can be used as a compression part to secure additional luggage for those times when you need a place to tuck your jacket when touring, or when you want to secure luggage or a sub-bag that you can't fit inside.It is a functional part to fix the luggage between the bag body.
Splashproof zipper where it won't get wet
・Top flap with all internal waterproof pockets.There is a splash proof zipper on the back of the flap, so it is not exposed to rain.
Easy opening and closing with Doppelganger G-hook
・Simply hook the G-hook to the loop on the flap.Deep claws for secure hooking.The stress of opening and closing is reduced as much as possible.
[features of each part]
■Doppelganger G-hook
Original designed thick-walled G-hook for 25mm belt. Deep claws for secure hooking.The curve of the belt adjustment slider holds the belt firmly in place.
■Roll-top structure with wide opening
The bag has a waterproof roll-top opening.An opening is provided on the opposite side of the side stand to prevent the luggage from falling out when riding.
■Hand Grip
Front and rear grips are provided for lifting and lowering the bag onto the pillion seat.It can also be used as a carrying grip.
■Shoulder strap
Comes with a shoulder strap up to 130cm long.It is essential equipment to move from the entrance to the bicycle parking lot and from the motorcycle to the camp site.
■D-ring for shoulder strap
D-ring with inner diameter 3, 8cm.The buckle of a commercially available touring cord can be threaded through it, so it can be used as a fixing base.
■Daisy Chain
3.6cm wide daisy chain for the fixing tooling cord.Under the front and rear grips of the bag.
■Handle excess belt with belt reel band
By using the belt reel band attached to the end of the mounting belt, it is possible to roll up the excess of the belt to reduce the flapping caused by the running wind.
[How to attach the bag]
1. Attach the fixing belt to the vehicle frame and connect it to the fixing buckle on the bag body.(left and right)
2. Attach the fixing belt to the rear hook or rear rack and connect it to the fixing buckle on the bag body.(left and right)
3. Adjust and fix the bag body to the most stable position on the seat.
[How to connect the floating top flap]
The top flap is a functional part that allows you to fasten the bag to the main body by tightening the belt.Splashproof zipper pocket on the back of the flap.
*When you have a small amount of luggage, there is enough space between the top flap and the bag itself.
1. Connect the slider belt to the D-ring on the top flap.
2. Hook the G-hook on the loop for the multi-strap and fix it.
[how to use the Bertolier band]
The front fastening belt and the rear fastening belt have a function to bind the excess belt after the bag is attached.It prevents the excess belt from flapping when driving, and improves the safety of riding when the bag is installed.
1. Unfold the hook and loop fastener on the end of the belt.
2. With the hook and loop fastener in place, roll up the excess belt.
3. Bind the rolled up belt with hook and loop fastener.The excess belt is fixed and prevents the belt from flapping when riding.