【JMCA规格】Racing Line 全段排气管
商品 # S-K2R2-HAPCJPA
商品 # S-K2R2-HAPCJPA
适配车型链接
Fits: YAMAHA TRACER900 15-20 GT available, YAMAHA MT-09 14-20 ABS, YAMAHA XSR900 16-20
Was the one you received as per Image?
AKRAPOVIC is a quintessential AKRAPOVIC, with really high QUALITY.
Was the installation difficult?
I think the troublesome part is up to the installation of the exhaust manifold.
The Gasket to the exhaust port was difficult to get in and was a pain to get out and fall out.
Also, be careful with the Stud bolt on the exhaust port.
Overtorque or single-point tightening may result in breakage.
Be sure to tighten evenly etc. and use a Torque wrench.
Other than that, there is no Large work.
I think it is better to retighten the nut at the stud bolt after some driving.
I was able to retighten about 1/3 turn.
PLOT, a Japan distributor, has posted a video of the installation, so it is easy to refer to it.
How was your experience with it?
The look is great because we didn't want to break the OEM Style.
The rest is quiet because of JMCASpec.
I don't know how it runs because I changed it as fast as I could on the day I took delivery of the car.
I don't think there is any change.
[Included Parts:were they on?
Anti-seize Grease
Torque is also listed in the instruction manual.View Detail
Fits: YAMAHA TRACER900 15-20 GT available, YAMAHA MT-09 14-20 ABS, YAMAHA XSR900 16-20
I bought a used 2018 Tracer 900 and had it installed as part of the delivery service. I was a little concerned with the shop manager because the precision was not quite right, but in the end, the exhaust leak is gone and now I can rest assured that the car will be inspected. My father-in-law's Toracer is a Sakura, but we chose the AXIS Lapo Sound, because Torque is a big motorcycle by nature, so we don't know the difference, but we liked the Sound anyway.View Detail
Fits: YAMAHA XSR700 18-21 *Model confirmation required*., YAMAHA MT-07 14-21
The OEM sound is good even though it is well muffled, but I still wanted the power and the feeling of the heartbeat of two cylinders, so I took the plunge and bought it.
The installation was not difficult as long as there was a tool, and the weight of the exhaust system was not that heavy, so it was easy to replace by one person.
Because it is JMCASpec, the volume is suppressed, but the sound quality becomes low, and it is possible to use it.
The sound of each shot is like a hudrill.
The Exhaust SystemDesign also matches the vehicle body and I am very satisfied!View Detail
Fits: KAWASAKI Z650 17-19 2BL-ER650H, KAWASAKI Ninja 650 17-21 2BL-ER650H)
It's so quiet... O2 Sensor, Sprocket Cover and Left Side Cover If you take off the Connector, remove it, remove it completely, and then search for it again, you will be able to find it again It can be installed with plenty of room to spare without being clumpyView Detail
Fits: YAMAHA XSR700 18-21 *Model confirmation required*., YAMAHA MT-07 14-21
After hesitating with PowerBox, I chose this one and bought it for XSR700
The instruction manual, installation accuracy can be installed without any problem, and the inspection certificate of exhaust gas is properly attached I did
The sound quality is more thumping and thumping like a 270 degree Crank's TWINEngine, but the atmosphere is good I feel that the volume is a bit lacking (It's a JMCA Correspondence, so I don't blame them.)
On the driving side, you can feel the torque up in the low and mid range, the pulse up, but not so much in the high rpm range I don't know, but I don't think it will change much
As others have written, it's an expensive item, so Emblem is not a sticker, but an engraved I want it to be a good thingView Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。