聚碳酸酯保护器为标准配置。
时尚的护手,标准配置为杆端安装聚碳酸酯(PC)保护器。
聚碳酸酯(pc),可抗冲击、抗紫外线、抗低温和高温,是一种多功能、简单和时尚的设计,可用于任何风格的车辆。
它不仅增加了防风效果,而且还具有减轻正面冲击的功能。
安装就像固定在车把末端一样简单。
虽然不需要传统护手的复杂性,但它通过高强度的铝合金杆端塞牢牢地固定在那里,这是由加工制造的。
保护器可以拆除,可以安装其他设计的ZETA保护器,让您享受您喜欢的造型。
■通过松开臂部螺栓,可以在杆端轴线上无级地上下调整角度。
■特殊的垫片允许总共九个位置的调整:从中心位置开始的一个5°台阶,四个上台阶和四个下台阶。
很容易适应你喜欢的造型。
■杆端塞上的凹槽可以将手臂位置调整到两个位置,以适应车辆。
它可以防止车身脱落,还可以作为一个挡板,防止因翻倒而损坏节气门管。
■护腕是由柔软而有弹性的pu树脂制成。
减轻正面冲击,防止对护卫体的损害。
■通过安装和拆卸带有激光打印标志的前板,可以有两种设计选择。
■可拆卸的聚碳酸酯保护器是标准配置。
■允许连接Zeta xc保护器系列。可以享受到多种多样的造型选择。
【可附加保护器】。
zeta x3 protector', zeta x3 protector
zeta x2 protector', zeta x2 protector
zeta xc protector', zeta xc protector
zeta xc-pro protector', zeta xc-pro protector.
【如何选择声波护手】。
<通用型 zs72-2000/ze72-2100
可以安装在杆端塞子被拆除和空心的车辆上。
●本田汽车
如果安装区域存在半月形阶梯状的内重物,如果内重物被移除并中空,就可以安装。
●suzuki车辆
如果有的话,可以把内部的砝码拆下来,如果是空心的,可以安装。
<m16/m8型 zs72-2001/zs72-2101>'
取下车把端塞,检查车把端区域。
●雅马哈汽车
可以安装在车把末端加工有1.5毫米间距的m16的车把上。
●川崎车辆
可安装在车把上,用m8螺母焊接在车把末端。
Polycarbonate protectors are standard.
Stylish handguard with bar-end-mounted handguard polycarbonate (PC) protector as standard equipment.
Polycarbonate (PC), which is resistant to impact, UV rays, low and high temperatures, has a versatile, simple and stylish design that can be used in any style of bike.
Not only does it increase wind resistance, it also has the function of mitigating impact from the front.
Installation is as simple as fixing it to the handlebar end.
While not requiring the complexity of a conventional handguard, it is firmly secured with a high-strength aluminum alloy bar-end plug made by machining.
The protector can be removed for use, or a ZETA protector of another design can be attached, allowing the user to enjoy their preferred styling.
■By loosening the arm bolts, the angle can be adjusted steplessly up and down on the axis of the bar end.
■The dedicated spacer allows position adjustment from the center position by 5 degrees per level, 4 levels up and 4 levels down, for a total of 9 levels.
Easily adapted to your preferred styling.
■The groove in the bar end plug allows the arm position to be adjusted to two positions.
It prevents the body from falling off and also functions as a stopper to prevent damage to the throttle tube due to tipping.
■Knuckle guards are made of soft and supple PU resin.
Mitigates impact from the front and prevents damage to the guard body.
■Two design options are available by attaching and detaching the front plate with laser-printed logo mark.
■Removable polycarbonate protectors are standard.
■ZETA XC Protector series can be attached.A wide range of styling can be enjoyed.
[Protector can be installed]
・ZETA X3 Protector
・ZETA X2 Protector
・ZETA XC Protector
・ZETA XC-PRO Protector
[How to choose a sonic handguard]
Universal type ZS72-2000 / ZE72-2100
It can be installed on bikes with bar end plugs removed and hollowed out.
●HONDA Bikes
If the mounting section has a half-moon stepped inner weight, it can be mounted if the inner weight is removed and the section is hollow.
●SUZUKI Bikes
Inner weights can be removed if present and attached if hollow.
[Representative Models]
CT125, GB350/S, CB400 SUPER FOUR, CB1100/RS/EX, CB1300 SUPER FOUR, V-STROM 250
Remove the bar end plugs and check the handlebar ends.
●YAMAHA Bikes
It can be installed on handlebars with handlebar ends machined with M16 pitch 1.5mm.
●KAWASAKI Bikes
It can be installed on handlebars with M8 nuts welded to the handlebar ends.