- 改装零件
- 外观零件
- 后货架
- Riding Spot
- Riding Spot - 后货架
- 商品列表
- Touring Carrier Off-Road Line
Touring Carrier Off-Road Line
商品 # W-RSPT-012
商品 # W-RSPT-012
适配车型链接
Fits: YAMAHA SEROW 225 90- (Vehicles with cells), YAMAHA SEROW 225 W 90- (Vehicles with cells), YAMAHA SEROW 225 WE 90- (Vehicles with cells), YAMAHA serow 225 wwe [serow]. 90-, YAMAHA serow 225 w [serow]. 90-
I was thinking of using a used Carrier, but I didn't find one that looked good, so I decided to use it
The width of the front side was tight, but it was easy to install it by temporarily fastening it from the back side first and then expanding it to fit I did
The car is black, so I thought the white one would float, but it's good to use it &hellip If it's damaged, I'll strip the paint off [Color] Maybe I should repaint with Clear?View Detail
Fits: YAMAHA SEROW 225 90- (Vehicles with cells), YAMAHA SEROW 225 W 90- (Vehicles with cells), YAMAHA SEROW 225 WE 90- (Vehicles with cells), YAMAHA serow 225 wwe [serow]. 90-, YAMAHA serow 225 w [serow]. 90-
It is heavy because Material is iron. But it seems to be strong. As the dimensions of the details are tight, when installing, it does not fit if you do not understand a bit. What is disappointing is a painting that can not be said as good flattering. Since the film is thin, the paint will be peeled off immediately, so we painted Clear on top. In terms of price, I guess wonder if there is anything wrong..
I think that it was good as it began to accumulate the original purpose baggage.View Detail
Fits: HONDA XR250 95 -, HONDA XR400 Other information]T-2, HONDA XR250 BAJA 95-, HONDA XR400 Other information] T-2, HONDA XR250 95
We chose this one because we wanted to increase Frame rigidity by integrating it with the Sub-frame, even if it increased in weight.
The installation of the Seat was done by inserting a washer in a hurry because the collar was not thick enough to hold the Seat together and the installation part started to bend during temporary tightening.
The hole positions are perfect, and it would be perfect if there were additional thicker colors in the Included Parts:section.View Detail
Fits: KAWASAKI D-TRACKER -07, KAWASAKI KLX250 , KAWASAKI , KAWASAKI D-TRACKER [D-Tracker]. -07
I installed this on my 2001 dTRACKER.
Bolt at the attachment point to the vehicle body is M6 and Quantity:2pc and M8Quantity:2pc only.
The carrier itself looks sturdy, but I'm not sure I'd be able to carry a full set of camping gear in a box like this.
I think it is better not to load the cargo without Brown too much.View Detail
Fits: SUZUKI RMX250S 96-, SUZUKI RMX250S 96-
I wanted to add the GIVI MonokeyPannier that I'm using on my ZX11 I bought it as a base The installation is two Bolts for the installation of Small Bag and Seat & Side cowl installation BoltQuantity:Pair (for Left and Right) (For Bolt length change, it comes with the product), but you can use the Accessory Case side When you install from Bolt, the position to put the Bolt of Seat and co-tightening is about 3cm above Gap The order is to put in the Seat and the Bolt side of the co-tightening, then the Accessory Case side As an order, put in the Bolt side of the Seat and co-tightening first, then the Accessory Case side Put the bolt of the Seat side If you don't do the same order of tightening, the bolt of Seat side will be broken It may be a bit dull, but the bolt of Seat side is the standard, and the bolt of the Accessory Case side is more than appearance Secure it at an angle that rises to
I'm using this with a Mount base for Monokey in my Pannier It is very rigid and of good quality and does not wobble at all There are also enough of them for Carrier to get full marksView Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。