铱合金 IX 火星塞 DCPR6EIX 3670【日本制造、原装进口】
商品 # DCPR6EIX
商品 # DCPR6EIX
四轮车使用的塞子主要是 "整体式 "或 "冲填式",两轮车使用的 "螺纹式 "是 "分离式"。
"分离式 "的端子部分会脱落,但 "一体式 "或 "冲钉式 "的端子不会脱落。如果你试图强行拆下它,终端部分可能会被破坏。
当把 "分离式 "作为 "螺丝式 "使用时,请取下端子螺母。
在使用端子螺母时,要确保它没有松动,如果松动了,要用钳子拧紧。
【nggk插头的特点】--超 "宽范围 "插头--中心电极采用 "铜芯 "结构,铜芯被封闭在插头尖端附近,以便快速散去大量热量。
因此,实现了既耐烧又耐熏的超 "广域 "插头。比较有铜芯和无铜芯插头的热性能,有铜芯插头的热性能优于无铜芯插头。耐污性好,耐热范围广。塞子的热值--采用热值较高的新型陶瓷--氧化铝瓷作为绝缘体。高温下绝缘性能优良,保证火花。
。优异的导热性能,防止过度烹调。
。热冲击(突然发热。它耐急冷,具有优良的机械强度。-结构坚固、气密性好--绝缘子与主要配件采用特殊粉末连接,具有良好的气密性和结构强度。 电极由一种特殊的镍合金制成,具有卓越的耐久性。- 绝缘体的波纹保证了绝缘性,并防止 "闪络"--在停车时,在终端和主配件之间持续施加高压。
较高的电压往往会沿 "绝缘体 "表面泄漏,火花间隙之间所需电压较高,容易引起闪络。
为防止闪络,增加绝缘子表面与主要配件之间的距离,设置绝缘子波纹以固定绝缘子,防止闪络。什么是闪电侠?它是为了在终端和主配件之间产生火花,如图所示。闪过■是什么原因让插头变得优秀。
[Features of NGK plug] |
- This is a super "wide range" plug - |
The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
■ Heat value of the plug |
- High alumina porcelain from New Ceramics is used as the insulator - |
- Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
- Strong and airtight in construction - |
Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
Special Nickel alloy electrodes are used for superior durability. |
- Corrugations in the insulator ensure good insulation and prevent flashover - |
During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
What is a flashover... |
It is a spark between the terminal and the main unit fitting as shown in the image. |
■ Flashover |
■The advantages of the plug |
适配车型链接
Fits: HONDA VTX1300 03- [displacement]1300 [number of units required]4, HONDA VT1300CX-ABS 09- SC61 09.10- [displacement]1300 [number of units required]4, HONDA VT1300CX 09- SC61 09.10- [displacement]1300 [number of units required]4, HONDA VT1300CS-ABS 10- SC67 10.3- [displacement]1300 [number of units required]4, HONDA VT1300CS 10- SC67 10.3- [displacement]1300 [number of units required]4
He has bought it, although he thought that it could seldom feel.It could feel that an effect was unexpected and the Torque became thick at the time of acceleration.The vehicle type of 1 cylinder, such as American ones, and two Plugs may have a fairly large effect.View Detail
Fits: HYOSUNG RX125 99- [Required number]1, KYMCO Ve-Knocks 250 Required quantity]2, HONDA VFR750 displacement]750 [number of units required]4, HONDA VFR750F 90-93 RC36 [displacement]750 [number of units required]4, HONDA VFR800 98-02 RC46 Domestic model 98.4-02.1 [displacement]800 [number of units required]4
I was going to go for the standard OEM spark plugs for this service but when I saw the price of the iridium ones for the CBF1000, it was a no brainer to get these bad boys. These were easy to find using the tools provided by Webike and all the links to the manufactyrers websites.The cost was very good and purchased a set of 4.I have used iridium plugs before with great success as they seem to fire better than standard. I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice and snug. The plugs themselves are perfect. I have had some plugs befpre from overseas suppliers and generally, one of those had been a dud or just been broken during transit. Not this time. All 100% perfect and fired as they should. They do have a better performance than standard plugs but you would have to be a professional to actually notice the difference of the bat. Once fitted, the bike just feels smoother. Take your time and don't over tighten. One very happy customer. Thanks WebikeView Detail
Fits: HONDA HORNET-S PC34 European specification [displacement]600 [number of units required]4, HONDA HORNET 99-07 CB250F MC31 99.12-07 [displacement]250 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750R 87- RC30 [displacement]750 [number of units required]4
i have always used NGK Iridium Plug CR9EHIX-9 4273 spark plugs they are the best for long run.i have used this spark plugs on my honda cbr xx superblack bird 1998 model they work very well no maintainance required.View Detail
Fits: KAWASAKI 1400GTR 08-, KAWASAKI ER-6f 06-, KAWASAKI ER-6f 12-, KAWASAKI ER-6n 06-, KAWASAKI Ninja 650 12-21
I wanted to try out the iridium plugs on this old girl for my own peace of mind and to see if there is much difference between these and standard. These were easy to find using the tools provided by Webike and all the links to the manufactyrers websites.The cost was very good and purchased a set of 4. I have used iridium plugs before with great success as they seem to fire better than standard but never in this 2002 R1. I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice and snug. The plugs themselves are perfect. I have had some plugs befpre from overseas suppliers and generally, one of those had been a dud or just been broken during transit. Not this time. All 100% perfect and fired as they should. They do have a better performance than standard plugs but you would have to be a professional to actually notice the difference of the bat.Once fitted, the bike just feels smoother. Take your time and don't over tighten. One very happy customer. Thanks WebikeView Detail
Fits: HONDA HORNET-S PC34 European specification [displacement]600 [number of units required]4, HONDA HORNET 99-07 CB250F MC31 99.12-07 [displacement]250 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750R 87- RC30 [displacement]750 [number of units required]4
The cost was very good and purchased a set of 4.I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice.Thanks WebikeView Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。