269.24 RMB
(5,635 日元)
4 (14 评论)
Average
EFFEX Handlebar Weight BIGข้อมูลตัวสินค้า ระบุแค่ใช้กับ Handle Bar ขนาด Outer Dia. 22.2mm แต่ไม่ได้ระบุว่าใช้กับ Inner Dia. 14 mm. ทำให้เกิดความเข้าใจผิด ไม่สามารถนำมาติดตั้งกับ Inner Dia. ขนาด 18-19 mmm. ที่มีอยู่ได้
Reviews For EFFEX 把手平衡端子 (Φ14) From Other Webike User
Excellent
It is easy to install.Installation is very easy, just tighten with Hexagonal Wrench.
I installed it on my VTR250, and the chattering feeling at the time of 1st gear acceleration was gone, and the vibration was reduced in general.
I was very pleased with the texture and it was exactly what I expected which is nice.View Detail
Excellent
Vibration has been alleviated!Outside Aluminum Handlebar and Bar End were installed from the time we purchased Motorcycle in the second hand, so I was suffering from numbness of hands due to micro vibration. I decided to install something countermeasure, I chose this product with reference to impressions of various products.
After installation, the vibration did not disappear at all but it was reduced compared to before installation, and I like the Large size as well.
As Handlebar is not Steel like OEM, I think that some vibration is unavoidable, and I am not a vibration level Level that I can not tolerate as I am now.
For products, if you dare say hopefully, if you are also dealing with Steel handle, it seems that universality increases and product power will increase.View Detail
Excellent
very goodColor and texture are imagination and price is affordable so I am very satisfied. When undoing Bolt too much, Rubber and Nut are left behind in Handlebar, so it is better to be careful.View Detail
Average
Is it a bit of an eye?.When you exchange to EZ-FIT Bar of EFFEX, I purchased it because NORMAL's Bar End will not be attached.
There are Large Yui Type and Small Snow Type attached this time, but I felt like I was going to be shocked at Small Snow Type and made it a Large Yu Type.
Color made it Blue with Yamaha's Racing blue image, but I feel that it looks somewhat crappy with a slightly blueish blue color..
With slightly dark eyes color, I think that Matching is also the best if you let me slender a little.
Well, I think that it is not bad Design if we do not care about fine details.
It's super easy to install all the eyes on the Handlebar and tighten the end Screw.
O - ring was attached to the base of the plug - in part, is it devised so that extra moisture does not enter inside the bar?
It is quite polite making.
The original purpose is vibration reduction, so the plug-in part is a long and heavyweight Gold genus.
The bar end of NORMAL was also made quite heavily, so it was not felt much different, but in other words, is not it good to think that it is firmly alleviated?View Detail
Excellent
It was the same sense as OEM.Handlebar from OEM to EZ-FIT BAR (Black - Material : Aluminum), we changed Bar End to this product.
In the photo, Bar End is Black, but originally purchased Gold, I tried wearing it because it did not like the atmosphere, so I painted Black by myself.
Even after exchanging Handlebar and Bar End, you will not feel unpleasant vibration on Handlebar and you can handle it the same sense as OEMHandlebar + OEMBar End.View Detail
Most Viewed Reviews Of EFFEX Bar Ends
Excellent
Reduced handlebar vibrations! very happy with this purchase. previously i had a difficult time buying handlebar ends because they were mostly cosmetic, hardly any weight on them at all. (you need weight in order to cancel out vibrations.) and because most of this product is INSIDE the handlebar, is does not protrude too much out of the handlebar. (this is a minor cause for concern because if the motorcycle falls, the handlebar end will not have much protection. but the benefits of the vibration dampening outweight this.)View Detail
Excellent
It is easy to install.Installation is very easy, just tighten with Hexagonal Wrench.
I installed it on my VTR250, and the chattering feeling at the time of 1st gear acceleration was gone, and the vibration was reduced in general.
I was very pleased with the texture and it was exactly what I expected which is nice.View Detail
Excellent
This is an inexpensive product that is easy to install, but we clearly experienced the benefits.[How is it used?
Suppression of vibration transmitted to the Handlebar
Was the one you received as per Image?
Yes
Was the installation difficult?
No, sir. It generally took about 5 minutes.
How was your experience with it?
Unpleasant vibrations transmitted to the Handlebar were reduced, and hand numbness and fatigue were reduced to a large extent.
[Included Parts:were they on?
The hexagonal wrench used for installation was also included, which was convenient as there were no other tools to prepare.
[Was there anything that disappointed you?
No, there is not
Other items that would be helpful
I think that anyone can install it easily without instruction manual.
It will be installed inside the Handlebar, so there is no picture of it.View Detail
Very Good
Handlebar Weight to prevent numbnessI bought the CB1100RS because I ditched the Weight when I went back to the OEMHandlebar from the Separate handle.
I chose this one with the Weight in the Handlebar to reduce vibration, so I chose this one with the Weight at the same time as the Bar End.
When I tried to pull out the handlebar, I couldn't get it back because the tip of the handlebar came off and remained inside the handlebar.
I pushed Rubber into the billion and put a new Weight on it.View Detail
Average
Comparable to OEMI bought the Stainless Steel type when I changed the Bundle on my ST250 It's 10g heavier than the OEM, but slightly lighter than the OEM because the center of gravity is closer to the Clamp I think this is the effect In fact, there is no unpleasant vibrations up to 80km/h after installation, and it is a good thing that there is no unpleasant vibrations over 80km/h with the trunk of the knee grip There is the same cycle of vibration, in essence, the timings that vibrate are the same as the OEM The Handlebar is shorter than the OEM, so those who haven't changed the Handlebar will have to replace it and you may feel a slight increase in vibration
Other imprecise comments about the size of the O-ring:Smaller is more appropriate There was a It's a little large I installed it as it is It was not easy to fit in, and I managed to push it in with a Slotted screwdriver and a hammer However, the rigidity of the LeftGrip is clearly improved after installation, so the original performance of the LeftGrip is only press-fit It may demonstrate a
As for the ST, the OEM is a pretty heavy Bar End, so as far as vibration reduction through replacement goes It might be better not to expect too much; the Compact of the Bar End will be used to increase the vibration Enough to be an option if you are a Custom lover who wants to make Large achieve not so much I think it can be However, it is not cheap, so my honest opinion is that the cosmetic value is subtle in terms of performanceView Detail