The speedo itself looks and works great. Quality of assembling gives a hope for long last usage of product. Absence of english in manual not cause any problems with installation. Easy to set up with right tools.
It was supposed to be highly visible and multifunctional and satisfying, but during the final installation, the body installation Trouble with the Screw I'd like to have it The Instruction Manual should at least include the installation torques In the meantime, if you're buying, use a medium strength screw lock and install it carefully recommendedView Detail
Installed on SR400fi I don't have any technical knowledge, but I was able to install it while looking at the wiring diagram When the pulse extraction of the octopus is branched off from the Ignition coil, you can use the Orange The wiring must be branched The fuel warning light will have a separate indicator addedView Detail
Because AceWell was malfunctioning, I bought it thinking that it would be large and strong if it was a DAYTONA. However, MODE switching was impossible at around 500km, and Speedometer also malfunctioned immediately after that. However, it was impossible to switch MODE in about 500km.View Detail
On the W650 It's good in a simple, non-machineMachineMachine feeling, but in a classical feeling. The Tachometer indicates that the display is also Large and reliable. A noteworthy feature is the visibility. The screen does not reflect in the sunlight.The Indicator is easy to read, and the Small Speed display, Small Distance and Voltage display can also be viewed at a glance while driving. The first one was not visible in the sunlight, but this one seems to have solved the problem. Of course, the visibility in the tunnel at night is perfect. View Detail
Installed in ESTRELLARS (95). Meter diameter is large and easy to see. The speed is displayed Small Digital, but there was not hard to see. The Handlebar area has been cleaned up.View Detail
I've been told it's not possible for a Retro SR, but I like it (lol).
I quit Battery reply just to put this on and put Battery on (lol). (e.g. "I'll be back")
I can't get enough of the opening ceremony when you turn the key on (laughs).
Opening Ceremony for SR!
I can't get enough of it (laughs).
But Tachometer is the main MODEL I bought, so Speedometer is very much a Speedometer. It's hard to see.
By the way, the installation was done by a motorcycle shop, but XJR400 (RH02J) The meter output is also electric because it uses the front part of the front of the car.
Installation seemed to be able to be done easily, but the setting of the speed display seemed to be Large strange.
If you want to use Mechanical's output, there is a conversion adapter available. Use.
Also, maybe it's because I have the Norology Hot wire installed, but the RPM's are often unstable at times.
It's generally OK, but sometimes the needle dances (laughs).View Detail
It was supposed to be highly visible and multifunctional and satisfying, but during the final installation, the body installation Trouble with the Screw I'd like to have it The Instruction Manual should at least include the installation torques In the meantime, if you're buying, use a medium strength screw lock and install it carefully recommendedView Detail
I have bought this air intake item, to continue building my honda grom, alreday equiped with 181cc Takegawa big bore kit. The result of installation, after simple manipulation with Fi controller, was good, as expected. Installation cause no problems at all, you will need a common tools for it, Tools, which are going with your grom, are enough. Highly recomended for purchase. View Detail
Planned to make a baby stunt bike from my Honda Grom) OEM clutch springs did not allowed me to perform even the simplest wheelie the way a wanted. Studying a Grom forums I found a link for those springs whith positive reviews. Terms of delivery and package like always with webike did not give a chance for complaints. Installation was not a problem, even whith my little experience. The only thing to remember is that changing even three of six springs completely changes the start of your bike moving, so I suggest to try it for the beginningView Detail
Searched for a long time appropriated big bore kit, watched tons of videos and foreign forums (unfortunately not a popular theme and bike in Russian Federation). According to results the ordered kir from takegawa was the best for terms "price/results of tuning". Package arrived according to described period, had no damage at all. Instruction manual written not English, but lot of videos eat most popular video hosting helped to install it mostly without any difficulties. Like I said before, highly recommended. View Detail
100% satisfied with the original Biltwell quality!!! Size mesh helped to choose the right one for me. The helmet fits and looks great, especially with original bubble visors. Price with sale programm and Webike points comparing with other web stores (even "official" one for Russian customres) is very attractive amd leaves no other choice but to bye this helmet. Recomended for purchase! View Detail
installation manual in English helped to switch the original grips, installed on my Buell clip'ons (custom made Virago front). Feels smooth, looks great especially with original biltwell solo seat (also black diamond printed). Hopefully the durability of these grips will approve the high priced (for rubber grips) purchase. Recommended for all classic look motorcycles View Detail