There is no problem with the function of keeping Rim cheap, but it is inconvenient for fixed Nut to use 13 mm Spanner.
Basically Motorcycle's 8 mm Bolt has a head of 12 mm, so I would like it to match it like other companies' products.
We are a rare Trike machine called Urals Sidecar 2016 GEARUp, but because there is Advantage that it will not fall over in rare circumstances, Sokosoko can thrust into Dirt.
In fact, in the Hokkaido Road Flat Gravel Dirt and the Road Flat Muddy Dirt ω, it is fully equipped and 40 to 70 km / I can run reasonably even at the h-th position and I can go fast by sliding a little, feeling is a little RALLY 50 sense ω
But, was it impossible too much? Puncture twice in the way of Hokkaido Two by the missing Valve part later, it was quite critical.
So, in order not to stepping on the same rut, only the rear wheels made a rim lock.
Since we used to ride KLX 125 C before, we have used Rim lock as well and we also used Rim lockSpacer and Air Valve Mud Guard as well.
I think that there are the rapists who thrust into the Dirt even in Ural, but from the small absolute number or even in the Net installation information etc etc.. I had difficulty without it.
, Rim width is all wheels / ALL MODEL2. 15in. It seems like (I made a mistake once ω) We are installing without problems.
After that, we ordered Rim lock of another Manufacturer, so we out of stock, so we chose Wig Big MODE as a substitute.
However, there seems to be no problem as seen, and we are satisfied with the high arrival speed and cost effectiveness.
With this in peace of mind Dirt and snow rural river etc. You can thrust into.View Detail
Ordinary Bead stopper. It is exhausted to this single word.
It is not a place to stick to Brand, even if you do work OK.
I can not see it after wearing it, so it's a kind of consumables because it is Rubber.
However, Spring washer and Nut are heavy in steel, so it seems that Balance is bad
In order to lighten even a little weight, Ping Washer + Thin 2 Nut to Double nut.View Detail
【What made you decide the purchase?】
The price is cheap
【How was it actually used?】
I do not feel a problem in use
【Was it difficult to install? (Hard parts case)】
Although it was the first installation, it was not that difficult if you made a gap with Rim by pushing Bolt with your finger.
【Please tell me the point of installation and hang (in the case of Hard parts)】
When I entered Bead, it was easy to start from the part of Bead stopper.
Even if you can not start from there, you do not have to stay between Stopper and Rim so you can put Bead once and then Tire Lever as Quantity : It is easy to insert using 2pc while triggering a little bead.
[Is there anything I was disappointed about?]
Bolt is long and Lock nut is 13 mm.
For this reason, it is difficult to tighten Lock nut if you do not have 13 mm Glasses or Spanner.
I tilted a 14 mm Glasses diagonally and forcibly forcibly.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Make Lock nut a little longer or shorten Bolt a little more or I'm happy if you could make Lock nut 14 mm.
【Have you compared items?】
MotionProMotion pro : LiteLoc 2. 15-inches Rim Lock
https : / / www. webike. net / sd / 21855599 /
[Others]
Because it is the first wearing, it can not be compared with others, but it does not seem to have a difference in functionality compared to those of famous Manufacturer.
Also, the weight was not too bad. If it is said that there is nothing to get to light, the above MotionPro 's thing is Material : It seems to be good with Plastic. However, Material : It seems that sometimes the resin cracks when Plastic's thing is over tightened.View Detail
I attached a Bead stopper for the first time.
There are no problems to run on unpaved roads, but when you run on a paved road Wheel Balance gets worse and vibration is amazing.
KLX 250 can not attach only one Bead stopper, but it can be avoided by adding a Wheel that is attached to the diagonal or a Balancer.View Detail
Quality is ○ RCetc. It is not inferior to Bead stopper of. There is no problem in quality at all.
And this price !!
If it is the same quality, it is decided that cheaper is better.
I hope to have more Size.
I installed it in Rear of WR 250 R.View Detail