57.31 RMB
(1,200 日元)
53.2~ RMB
(1,114 日元)
(
7% 折扣
)
4 (24 评论)
Excellent
CorocoroNORMAL did not rotate, it got worn and replaced.
I think that resistance is also decreasing a little by rotating, but I do not feel it in particular.
Color (color) You can also choose, so the Dress - up effect is half the Large - - - ?
Reviews For DRC 链条导轮 From Other Webike User
Excellent
Looks durableInstalled on XL125R, size S. When I went for OffRoad course, the NORMAL chain roller cracked after one run and flew away and was lost. Every time I run, the chain roller of NORMAL breaks somewhere. Bear Ring Type seems to be more durable, so it was EXACTLY for Repair.View Detail
Excellent
No problem with OEM ratio.I installed it on FZ750 modified (FZr1000Swing Arm).
There is no difference in quality compared to OEM.
It is very smooth because of the built-in ball bearing.
I drove about 2000km after installation, but there is no noticeable decrease, and durability seems to be no problem.
Even though it has Bearing built in, it would be nice if it was cheaper.
There are several sizes available, so you can choose the right size for your car model.View Detail
Average
It needed some processingIt's a standard KLX125, but the KLX150BF is also equipped with one that doesn't turn as well, so we delivered it I replaced it during maintenance
I don't know if it's the individual difference, but as it is, the diameter of LINK has a larger diameter than OEM It seemed to interfere with the mountings, so I used Cutters to remove some of the parts
Other than that, it's not particularly good or badView Detail
Average
Just fitSher rattles are somewhat concerned. Okay ~ Rumor is one piece decrease phenomenon?
Try to remove it, Big! It was rotating pretty.
How to exchange.
Engineer Tsuduaku from day to day, may have been rotating as it attached Grease to the moving section. Individual difference?
First, Glasses on Reverse side (Prevents Nut from tampering as it is from the Reverse side) , The table is a long patterned Wrench (Torque up) , * STAND a cushioning material such as Dustcloth (Described later)
Because I could not insert it to the end at the Bolt, as soon as I got to Screw Mountain tighten together.
The impression is the Brush - Bo effect? ??Surely the sounds that Bearing is running are done. It is not bad.
If the color is Red or Blue, so dirt becomes more conspicuous, so change it to black color.
By the way, winding Dustcloth on Side Stand is because you can give power without hesitation. If you are not nervous, feel free.View Detail
Excellent
DRC Chain rollerSmall Chain roller is also an exchange.
OEM is just stabbed in Rubber Color, but since DRC enters Bearing, it is obviously Upgrading, I think movement will improve a bit and I think that it will give you more or less muffling effect, OEM like plastic It was Chica Chi..View Detail
Most Viewed Reviews Of DRC Chain Roller
Excellent
Looks durableInstalled on XL125R, size S. When I went for OffRoad course, the NORMAL chain roller cracked after one run and flew away and was lost. Every time I run, the chain roller of NORMAL breaks somewhere. Bear Ring Type seems to be more durable, so it was EXACTLY for Repair.View Detail
Excellent
No problem with OEM ratio.I installed it on FZ750 modified (FZr1000Swing Arm).
There is no difference in quality compared to OEM.
It is very smooth because of the built-in ball bearing.
I drove about 2000km after installation, but there is no noticeable decrease, and durability seems to be no problem.
Even though it has Bearing built in, it would be nice if it was cheaper.
There are several sizes available, so you can choose the right size for your car model.View Detail
Average
It needed some processingIt's a standard KLX125, but the KLX150BF is also equipped with one that doesn't turn as well, so we delivered it I replaced it during maintenance
I don't know if it's the individual difference, but as it is, the diameter of LINK has a larger diameter than OEM It seemed to interfere with the mountings, so I used Cutters to remove some of the parts
Other than that, it's not particularly good or badView Detail
Average
Just fitSher rattles are somewhat concerned. Okay ~ Rumor is one piece decrease phenomenon?
Try to remove it, Big! It was rotating pretty.
How to exchange.
Engineer Tsuduaku from day to day, may have been rotating as it attached Grease to the moving section. Individual difference?
First, Glasses on Reverse side (Prevents Nut from tampering as it is from the Reverse side) , The table is a long patterned Wrench (Torque up) , * STAND a cushioning material such as Dustcloth (Described later)
Because I could not insert it to the end at the Bolt, as soon as I got to Screw Mountain tighten together.
The impression is the Brush - Bo effect? ??Surely the sounds that Bearing is running are done. It is not bad.
If the color is Red or Blue, so dirt becomes more conspicuous, so change it to black color.
By the way, winding Dustcloth on Side Stand is because you can give power without hesitation. If you are not nervous, feel free.View Detail
Excellent
Mounting on KLX 250I installed it in KLX 250.
With OEM Roller and Black,
I thought that I wanted a color at some point and purchased it.
I can not see much if I install it - - - (;^^)
Because it is just replacing with OEM's Roller,
Installation is very easy.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail