I bought it for Ninja 250 this time. I am a Garage keeper, but Dustetc. We are using it to protect from. Because there was no problem of rain, wind and ultraviolet rays, whatever it was, I was looking for Cover with emphasis on Size. Kawasaki 's Bike Cover is finely set to the shape corresponding to each Genre Motorcycle, it is Just fit! I do not know the durability and usability in the outdoors, but there are plenty of thickness and there is no problem with the wind countermeasure with Belt and Belt with Rubber to prevent rattling? One problem is that it is hard to understand the front and back when hanging Cover.
It is used for ZZR400. A size also comes out exactly and there is no dissatisfaction in particular. Even if it covers a cover immediately after a run, since it hits and melts into a muffler, it does not become precocious. However, it is whether to buy it with one with a high (it carries out more than double [ of the general-purpose cover of the other company ]) price next ...View Detail
There is only pure exclusive elegance after all and it is a just fit to ZZR400!! It covers finely to a tire and there is also no excessive overabundance. It is easy to equip also with the hook under a car body by one-touch, and is minimizing also with [ by a wind ] butter. The hole which lets Locke for theft prevention pass is also forward and backward, and is dramatically easy-to-use. b which was a generally satisfactory excellent pieceView Detail
[How is it used? The product is used outdoors in storage conditions exposed to direct sunlight, wind, and rain.
Was the one you received as per Image? It was the same Design as the Image picture of the product. The last time I purchased this product (4 years ago), it was a little bit larger in size than the Quantity:Pair (for Left and Right) It was located in two places. This time, the logo is smaller, and the front and the quantity:Pair (for Left and Right) The total number of locations was changed to three.
Points to note, comparison with other products I have been replacing my Kawasaki motorcycleDress for many years. In storage conditions outdoors exposed to direct sunlight and wind and rain, the rain will stain or otherwise degrade the product after about 3 to 4 years. My friends who use Motorcycle Covers made by other manufacturers also said that the covers wear out after 3 to 4 years, so I think that this is normal for the durability of the quality.
Functions/Features Holes for anti-theft locks:Two holes at front and rear. They are 60mm in diameter. Ventilation:Quantity:Pair (for Left and Right) It is located in two places and seems to release heat and moisture. Does it melt with heat?:The product box says to use it after the Engine or Exhaust System has cooled down. However, I always apply Cover as soon as I finish running, and it has never melted. So it is your own responsibility and judgment. Prevention of flapping:Adjustment straps are provided at two locations on the front and rear to tuck the cover. Previously, there was an attachment that snapped in place at the bottom of the center of the vehicle body. Attachment was attached at the bottom of the center of the body, but it has been changed. I guess many people got burned (I was burned by an exhaust pipe once). So, I am glad that it is now a string.
[Note] I think this product is used with the Handlebar Locked to the Left. I don't think that a car model with Handlebar Lock on Right would be covered by Beauty.View Detail
It is written on the box that it can be used for ZX-14R, but it is small for ZX-14R. 。 LimitIt is not impossible to use, but there is no room at all. It was impossible for me who wanted to use Cover roughly.
I have a single seat cover installed on my car and if I force the cover to be installed in this condition, the rear tire will stick out a lot. If you fold the Mirror and remove the Single seat cover, it will be a little better… 。
And the texture is cheap for the price. The front and rear U-shaped lock holes are too large. There is a Ventilation hole around the Tank side, but this hole is not good at all. It is true that the Ventilation hole is constantly open, so the moisture and heat inside the Cover can be discharged, but if it rains, it will be out. It is impossible outdoors. We keep our cars and motorcycles in a covered garage, but I couldn't bring myself to use this Cover! 。
I think it can be used for those who want to use the Cover roughly in 250cc to 400cc in terms of Size with complete indoor storage.View Detail
I bought it because it was to be stored outdoors Size is Exactly and it was fine on a windy day I've been using it for about 3 years and it's still in good enough condition View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail